microdermabrasion diamond/skin cleaning portable microdermabrasion machine
USD $1 - $3,500 /Set
Min.Order:1 Set
Shandong Huamei Technology Co., Ltd.
microdermabrasion diamond/skin cleaning portable microdermabrasion machine
Theory of Microdermabrassion
The newly developed "Micro-Dermabrasion" is a kind of quick, safe and efficient skin renewal technique to polish skin with thousands of different build-in diamonds in the machine. It is could be controlled by user to reach different depths of skin and have good curative effect on pigmentation, acne, rough pore, scarring, sun demaged skin or wrinkles.
Advantage of Microdermabrassion
1. Designed according to abundant alinical data worked out by many famous clinical doctors.
2. Two powerful imported water pump is much more effecient than other supplier.
3. Smart designed LCD screen is so easy to operate.
4. Easy to operate: The handpiece tip is smart and can be applied on the skin directly.
Specification
Pressure | -90~0Kpa |
Power | 250W |
Noise | ≤70dbB(A) |
Input power | 250VA±15% |
Vacuum pump power | 140VA |
Power supply | AC220~230V/50~60Hz 100~110V/50~60Hz |
Demension | 40x36x23cm |
Weight | 20KG |
Application of Microdermabrassion
1. Removing scarring and dirty from skin.
2. Decreasing acne, pock, rough pores.
3. Removing tint colour speckles, tiny wrinkles, wrinkles, pock and etc.
Operating instruction for Diamond Dermabrassion
1. Push in the movable ring of copper nozzle at the hand piece, and pull out the 6x4 size vacuum hose. Then push in the black plastic ring on the vacuum hose.
2. Put a drop of cream or milk lotion on the vacuum hose nozzle, push in the movable ring and insert the vacuum hose to the limit.
3. Insert a cotton swab into the Diamond Head, then tighten up the Diamond Head on the handpiece. Remove the cotton swab after every treatment.
4. Turn on the power switch.
5. Adjust the vacuum intensity by vacuum regulator according to the following reference table, the intensity display on vacuum gauge and check with the client for comfort, hoome Microdermabrassion machine.
6. Use the incline area of handpiece to contact with the skin surface. Proceed with a slow sliding motion. Do not place the handpiece at one spot for too long, doing so will cause harm to skin.
7 Adjust the crystal flow rate by the vacuum regulator slowly from minimum to maximum. For commonly use, do not set the flow rate to maximum unless it is of necessity. This is for better comfort intensity.
8. Gently stretch the skin with thumb and finger and glide the handpiece 2-3 times over the area being treated. Then cross again in different directions to prevent streaking lines as in the reference picture. Brush strokes or polishing motions may be used in different sites.
Do not use on these areas
*. Sensitive skin
*. Skin Rash
*. Damaged, inflamed or infected skin.
*. Surgical scar less than 12 months old.
*. Skin swollen
*. The probes can not point to Eye ball.
*. Genitals.
Accessorie of Microdermabrassion
*. Crystal treatment handpiece
*. Diamond treatment handpiece
*. Key
*. Power cord
*. Fuse
*. User Manual
SHANDONG HUAMEI TECHNOLOGY CO.,LTD.!
Shandong Huamei Technology Co.,ltd (Shorted as Huamei) located in the beautifuly International capital of Kite-Weifang city of China. Huamei is a professional high-tech company specialized in the development, production, sales and service of E-light, IPL, Diode laser, CO2 fractional laser, Microdermabrassion, Q-switch Nd Yag laser, RF and Cavitation medical equipments in China.
Our quality products also are hot selling items both at home and abroad. We enjoy sound reputation of high-tech beauty equipments as IPL skin rejuvenation system, Q-switch Nd Yag laser, RF device, RF& IPL system and cavitation system etc. Our products are widely used at the department of beauty salon and dermatology hospital and medical insitute. Our products are certified by CE1023, ISO13485, SFDA, etc.
After sales service:
1. Within one month, if the machine is of any big fails, we will send you a new machine.
2. Within one year, if you send back the equipment for repair, we will be responsible for the repair, including the changes of accessories; both of them are free of charge.
3. After two years, we offer to repair the machine, but we require for the cost of the changed parts, not for manual cost.
4. If the buyer has any questions from our technical department, we can supply on-line service.
Clients focus on following questions,
A, what Certificate your products have?
(a.1) ISO 13485
ISO 13485 is an international approval for recognizing the Quality&Management system of Professional Medical manufacturer.
(a.2) CE 1023
Our equipment have got CE 1023 medical approval. Client of most countries can get import permission with CE1023.
(a.3) SFDA
The exportation of our products is not restricted.
B, If your company offer ODM/OEM, any cost?
Our company is one of the leading manufacturers in China and could offer OEM/ODM without any design charge.
C, What's your Warranty condition?
Our company could offer 1~2 year free warranty for inconsumable parts.
Our company offer lifetime maintenance and support.
D, If your company offer Training?
Our company offer training by three ways: Manual, video, one-line; we welcome your visit to our company for further training.