Fuctions and treatment effect of elight ipl rf 

1.Permanent hair removal.

2.Smooth wrinkles, face-lifting
3.Deep flecks, epidermis flecks or pigment treating the telangiectasis
4.Promote collagen to grow, strengthen flexibility of skin
5.Acne treatment
6.Shrink the thick pore
7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal
8.For exogenous pigment: tattoo, eyeliner and eyebrow removal
9.Skin whitening
10.Striae gravidarum removal

Main Technical Parameters:    

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

 Different types of laser tubes, USA Coherent RF Tube, China state-owned RF Tube, Glass Tube for your choice

co2 laser for vein removal

 

SC-2  fractional CO2 laser machine ( co2 laser for vein removal  )

Detail Application( Cosmetic and Medical Application):

Introduction ( co2 laser for vein removal )

1.  Fractional resurfacing is a new laser treatment modality that creates numerous                        microscopic thermal injury zones of controlled width, depth,and density that are                    surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid                repair of laser-induced thermal injury. This unique modality, if implemented with proper

laser-delivery systems, enables high-energy treatments while minimizing risks.

2. This machine use the RF Tube manufacturerd by Coherent America,the frequency can             reach more than 5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is  very clear,andless down time.

The Advantage of the RF Tube Fractional laser

1. RF Laser generator is more stable than traditional glass tube ,it is dot need service

2. With the RF laser Tube,the scanning depth can reach the derma layer,to accelerate the           collagen regrowth

3. RF Laser Tube makes the scanning dot much thinner and less harm

4. The Laser Tube frequency can reach more than 5000HZ,high speed scanner can get better       treatment effect

5. The high frequency of the RF Tube make the machine reach the ultra pulse mode ,whole       machine can use Fractional,CW,Pulse,Ultra Pulse,one machine can been used widely in           different surgery

6. Special designed energy self-inspected and energy replenishment system,improving the         stability and effect

7. Multi safety protection,water ,electric,remote interlock warning alarm

8. Laser anti-leak designing,confirm the operator and client safety

9. Whole low voltage system,no electric danger and no electric radiation

Specifications ( co2 laser for vein removal )

Two Treatment Heads(100mm and 50mm)

Scanner Head: 100mm diameter (Scanning Size: Maximum 20*20mm)

Cutting Surgery Head: 100mm diameter

Scanner Head: 100mm diameter (Scanning Size: Maximum 20*20mm)

Cutting Surgery Head: 100mm diameter

Optional head: vaginal head 

The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.

Principle of RF CO2 Fractional Laser

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

Operation interface ( co2 laser for vein removal )

Factory Photos of SC-2 Fractional CO2 laser:

USA RF tube Report of SC-2 Fractional CO2 laser:

Effect of SC-2 Fractional Co2 Laser:

Package of SC-2 Fractional Co2 Laser :

Factory Imagine

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Treatment theory

e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling 

The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.