hot sell fractional co2 laser for scar removal
USD $1 - $6,000 /Piece
Min.Order:1 Piece
Beijing Goldenlaser Development Co., Ltd.
hot sell fractional co2 laser for scar removal
1.2 years Warranty
2.CE
3.skin re-new, sun burnt recover,wrinkle removal
4.USA made co2 fractional laser scanner
Applications co2 rf tube/glass tube co2 fractional laser
1. Skin renewing and resurfacing
2. Smooth burnt scars and surgery scars, etc
3. Wrinkle removal, skin tightening
4. Acne and acne scar removal
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
Features of co2 rf tube/glass tube co2 fractional laser
1. Particular designed intelligent laser control system ensures a precise treatment
2. Laser energy shooting is an even steady and safe treatment process.
3. Wide range application, effective treatment
4. Easy and fast treatment, no down time.
Main specifications of co2 glass tube/rf tube co2 fractional laser:
Laser mode: Low-valance mode
Wavelength: 10.6μm, far-infrared laser
Pulsed radiofrequency: 0.530 W
Control: Touching switch, microprocessor-controlled
Screen: LCD display
LCD power : 120W
Pulse width: 0.05-1s
Laser mode | Low-valance mode |
Wavelength | 10600nm, far-infrared laser |
Control | Touching switch, microprocessor-controlled |
Display | LCD display |
Working mode: | Continuous, single pulse, repeat pulse and super pulse |
Scan Graphics | Square, rectangle, round or customized graphics |
Dot quantity | 400 dots at most |
Working state | Hyper-pulsed mode |
Scan mode | Sequence scan or Random scan |
Pulse energy | 10mj to 130mj is optional for each dot. |
Laser apparatus | Sealed off laser device stimulated by direct current |
Condenser focus | f=100mm |
Beam divergence angle | 0.3 mrad |
Spot size | Min 0.2mm at the focus |
Radiation time | 1 ms |
Interval time | 1 ms |
Aiming beam | Less than 2mW, 635nm red semiconductor laser |
Cooling system | Closed loop circulating water |
Environment temperature | 5-400C |
Relative humidity | <80% |
Temperature in transit | -40-500C |
Humidity in transit | <85% |
Beam transport device | Articulated arm with 7-joint and balance weight |
Automospheric pressure | 86.0kkpa-106.0kpa |
Warning up time | 5 min |
Electromagnetic requirement | No electromagnetic Field interference |
N. weight (kg) | 50kg |
Power supply | 220V/110V |