Product Details

Theory - co2 fractional laser

CO2 Fractional laser is the most advanced conceptual fractional CO2 skin peeling laser system with a wavelength of 10600nm. In addition to its fine skin-peeling effect, it can effectively penetrate the laser beam into the dermis . It is the most beneficial skin recovery system and can achieve the long-term effect of collagen remodeling as well as improvement of aged skin conditions due to exposure to light. It can be very safely applied to various types of scars compared to the existing 100% total layer skin peeling lasers (CO2 or Er: YAG). In addition, it does not require a long period of recovery or side effects. It can remodel various types of deformed scars and skin tissue very effectively.

Specifications

1.2 years Warranty
2.CE
3.skin re-new, sun burnt recover,wrinkl

hot sell fractional co2 laser scar removal beauty equipment

1.2 years Warranty
2.CE
3.skin re-new, sun burnt recover,wrinkle removal
4.USA made co2 fractional laser scanner

Applications co2 rf tube/glass tube co2 fractional laser

1. Skin renewing and resurfacing

2. Smooth burnt scars and surgery scars, etc

3. Wrinkle removal, skin tightening

4. Acne and acne scar removal

5. Remove intractable chloasmas and pigmentation

6. Sun damage recovery

Features of co2 rf tube/glass tube co2 fractional laser

1. Particular designed intelligent laser control system ensures a precise treatment

2. Laser energy shooting is an even steady and safe treatment process.

3. Wide range application, effective treatment

4. Easy and fast treatment, no down time.

Main specifications of co2 glass tube/rf tube co2 fractional laser:

Laser mode: Low-valance mode

Wavelength: 10.6μm, far-infrared laser

Pulsed radiofrequency: 0.530 W

Control: Touching switch, microprocessor-controlled

Screen: LCD display

LCD power : 120W

Pulse width: 0.05-1s

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Laser mode	Low-valance mode
Wavelength	10600nm, far-infrared laser
Control	Touching switch, microprocessor-controlled
Display	LCD display
Working mode:	Continuous, single pulse, repeat pulse and super pulse
Scan Graphics	Square, rectangle, round or customized graphics
Dot quantity	400 dots at most
Working state	Hyper-pulsed mode
Scan mode	Sequence scan or Random scan
Pulse energy	10mj to 130mj is optional for each dot.
Laser apparatus	Sealed off laser device stimulated by direct current
Condenser focus	f=100mm Technology of Ultrapulse Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
Beam divergence angle	0.3 mrad
Spot size	Min 0.2mm at the focus
Radiation time	1 ms
Interval time	1 ms
Aiming beam	Less than 2mW, 635nm red semiconductor laser
Cooling system	Closed loop circulating water
Environment temperature	5-400C
Relative humidity	<80%
Temperature in transit	-40-500C
Humidity in transit	<85%
Beam transport device	Articulated arm with 7-joint and balance weight
Automospheric pressure	86.0kkpa-106.0kpa
Warning up time	5 min
Electromagnetic requirement	No electromagnetic Field interference
N. weight (kg)	50kg
Power supply	220V/110V

Application:

1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc