Laser Beauty Machine, buy Redness Removal Vagina Tightening Fractional CO2 Laser Vascular Treatment Medical Blood Vessels Removal Equipment(OD-C600) 15W(20W) on China Suppliers Mobile

Product Details

The range of IPL treatment:

(1)Everlasting hair removal:remove unwanted hairs under arms,on legs ,lips or other body part,etc.

(2)Pigmentation treatment:remove various kinds of pigment such as freckle,chloasma,aged spots,sunburn,etc.

(3)Telangiectasis treatment:treat angiotelec-tasis.

(4)Acne treatment:papule,tuber,Blain,acne,etc.

(5)Shrink pores,tighten skin,improve skin elasticity and glossiness.

(6)Eliminate and smooth wrinkles,acne treatment.

Main Technical Parameters:

Laser wavelength: 10.6µm

Laser unit:TEM00 module Co2 unit (best quality for the facula)

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm

Pulse width: the minimum pulse width is 0.1ms

Specifications

2. CE approved
3.can be medical used
4. increasing cutting speed

Fractional CO2 Laser Blood Vessels Removal

The Fractional CO2 Laser Beauty Equipment with a specific wavelength of 10.6 nm can be absorbed by human body tissue. Through fractional CO2 laser emitter, the micropulsed CO2 laser beam shoots on the target skin. Heat and electromagnetic effect of the fractional CO2 laser are adopted to conduct non-blood or less-blood cutting, cauterizing, gasification and minimally invasive treatment, which help avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery. Fresh and smooth skin regenerate after exfoliation of tiny scar.

Applications of Fractional CO2 Laser Blood Vessels Removal
1. Remove all kinds of wrinkles(brow veins, glabella veins, neck veins, pregnancy veins and so on
2. Strengthen and tighten skin, lift up face
3. Skin rejuvenation
4. Age spots and blemishes, acne and speckle treatment, blain acne, scabby acne, allergic acne, papilla acne, improving the appearance of lipoidic skin and acne pit.
5. Treat telangiectasis
6. Recover skin damaged by sun and remove scars caused by acne, surgery etc.
7. Remove skin excrescence, such as wart etc.

Advantages of Fractional CO2 Laser Blood Vessels Removal

1. Wide range application with this, effective treatment
2. Easy and fast treatment, no down time
3. Particular designed intelligent laser control system.

The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.

Technical Parameters of Fractional CO2 Laser Blood Vessels Removal

Treatment theory

e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling

The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.

Scan pattern size	0.1mm0.1mm-20mm20mm
Scan mode	Sequence scan or randon scan
Dots quantity	400 dots at most
Pulse duration	0.1-10ms
Spot distance	0.1-2mm
Pulse energy	1mJ-100mJ is optional for each dot
Cooling system	Wind and water circulation
Laser apparatus Principle of RF CO2 Fractional Laser CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.	Sealed-off laser device stimulated by direct current
Condenser focus	f=50mm
Beam divergence angle	0.3 mrad
Spot size	≥ 0.2mm at the focus
Radiation time/interval time	0.011s
Aiming beam	< 2mW, 635nm red semiconductor laser
Power supply CO2 laser system The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis. The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.	AC110V/220V, 50Hz/60Hz
Dimension	123cm45cm75cm
Weight	50kg

Screen of Fractional CO2 Laser Blood Vessels Removal

Other Services ODI® provide

Our Services

1.One-year warranty for the mainframe without charges for components change or repairing. Lifetime maintenance without any charge for repair fee. Only fees to change parts.

2.Free training for operation of the machine in our company, which provided by our specialized training department.

3.On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser machine, and after-sale maintenance

4.OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty machine

YOU MAY ALSO REFER TO:

Laser systems	OD-LS600+ nd Yag laser equipment
	OD-LS450 nd Yag laser equipment
	OD-LS500 nd yag laser equipment
	OD-LS550 nd yag laser equipment
	OD-ND100 nd Yag laser equipment
	OD-LS800 nd Yag laser equipment with articulated arm
	OD-IRL30 nd yag laser + IPL + RF multi-application equipment