FDA Approved (CE ) Wart Removal Machine Fractional CO2 Laser Price OD-C600 Warts Removal
USD $500 - $6,600 /Piece
Min.Order:1 Piece
Guangzhou ODI Science And Technology Co., Ltd.
Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.
(CE ) Wart Removal Machine Fractional CO2 Laser Price OD-C600
Wart Removal Machine Fractional CO2 Laser Price with a specific wavelength of 10.6 nm can be absorbed by human body tissue. Through fractional 30W CO2 Laser emitter, the micropulsed 30W CO2 Laser beam shoots on the target skin. Heat and electromagnetic effect of the fractional are Laser Age Spot Removal adopted to conduct non-blood or less-blood cutting, cauterizing, gasification and minimally invasive treatment, which help avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery. Fresh and smooth skin regenerate after exfoliation of tiny scar.
Applications of Wart Removal Machine Fractional CO2 Laser Price
1. Wart Removal Machine Fractional CO2 Laser Price Remove all kinds of wrinkles(brow veins, glabella veins, neck veins, pregnancy veins and so on
2. Wart Removal Machine Fractional CO2 Laser Price Strengthen and tighten skin, lift up face
3. Wart Removal Machine Fractional CO2 Laser Price Skin rejuvenation
4. Wart Removal Machine Fractional CO2 Laser Price For Salon Age spots and blemishes, acne and speckle treatment, blain acne, scabby acne, allergic acne, papilla acne, improving the appearance of lipoidic skin and acne pit.
5. Wart Removal Machine Fractional CO2 Laser Price Treat telangiectasis
6. Wart Removal Machine Fractional CO2 Laser Price Recover skin damaged by sun and remove scars caused by acne, surgery etc.
7. Wart Removal Machine Fractional CO2 Laser Price Remove skin excrescence, such as wart etc.
Advantages of Wart Removal Machine Fractional CO2 Laser Price
1. Wart Removal Machine Fractional CO2 Laser Price Wide range application with this, effective treatment
2. Wart Removal Machine Fractional CO2 Laser Price Easy and fast treatment, no down time
3. Wart Removal Machine Fractional CO2 Laser Price Particular designed intelligent laser control system.
Technical Parameters of Wart Removal Machine Fractional CO2 Laser Price
Scan pattern size | 0.1mm*0.1mm-20mm*20mm |
Scan mode | Sequence scan or randon scan |
Dots quantity | 400 dots at most |
Pulse duration | 0.1-10ms |
Spot distance | 0.1-2mm |
Pulse energy | 1mJ-100mJ is optional for each dot |
Cooling system | Wind and water circulation |
Laser apparatus | Sealed-off laser device stimulated by direct current |
Condenser focus | f=50mm Brief Introduction
Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.
The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc. |
Beam divergence angle | 0.3 mrad |
Spot size | ≥ 0.2mm at the focus |
Radiation time/interval time | 0.011s |
Aiming beam | < 2mW, 635nm red semiconductor laser |
Power supply | AC110V/220V, 50Hz/60Hz |
Dimension | 123cm*45cm*75cm |
Weight | 50kg |
Screen of Wart Removal Machine Fractional CO2 Laser Price
What Do We offer for Wart Removal Machine Fractional CO2 Laser Price
Service provided: | 1 One-year warranty for the mainframe without charges for components change or repairing. Lifetime maintenance without any charge for repair fee. Only fees to change parts. |
2 Free training for operation of the equipment in our company, which provided by our specialized training department. | |
3 On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser equipment, and after-sale maintenance and more. | |
4 OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty equipment. |
Pictures of our Factory & Production Line
If you want to save may contact imformation, please scan below code:
Features:
1. Reduced thermal damage to surrounding tissues
2. Rapid healing and minimal downtime
3. Stimulate deeper collagen with high pulse energy
4. LCD display panel provides easy operation with the latest microprocessor technology
5. Adjustable scanning patterns and size
6. Adjustable intensity of pilot beam from zero to maximum
7. Adjustable pulse duration
8. Last treatment setting memorization
9. Automatic alarm system for operation and troubles
10. Covers all functions of conventional system
11. No consumable costs