Turkish and other languages system laser hair removal machine diode laser machine

 

 

• Our mainly product:

• We have two colors of this machine:

• Advantages

  1. Germany DILAS semiconductor laser bar the output power can reach to 1800W.

  2.12*20mm big spot hair removal crystals, it can save the treatment time, increase the energy output and reduce the treatment cost

  3. Super strong cooling circulatory system (water, wind and Semi-conductor)

  4. 50J output power and 400ms pulse width, which can make sure the best result of permanent hair removal and reduce the pain to the least.

  5,The head can keep working for 30 million flashes, which prove that the high cost efficiency of our machine.

  6, A full range of self-test system, predict and detect possible failures and accidents occur.

• Treatment Scope:

  Remove the unwanted hair on all parts of the body:

  A arm hair 

  B lip hair

  C armpit hair

  D back hair

  E bikini hair

  F leg hair

  G any other unwanted hair

•  Description:

Semiconductor laser hair removal machine is freezing through technological innovation, so that the treatment of head to negative temperature, unlike other laser burns the skin, to better protect the skin, hair follicle melanin by specific wavelength of laser absorption, and the heat exchange to destroy hair follicle, the laser energy can be shot down into the hair follicles within the hair follicle is destroyed energy decomposition, so that the hair follicles to stop growing, because the laser energy about 15% of the skin can penetrate the dermis layer, the epidermis and more with melanoma of the hair follicle deep through the heat damage to hair follicle degeneration and atrophy; achieve permanent hair removal results.

• Technical Parameter: 
  

  Laser type	Semiconductor laser
  wavelength	808 nm
  Output Mode	pulse output
  Control Method	Touch control
  Screen Size	10.4 Inch
  Energy density	10-50J/cm2  (Deviation≤±2%)
  Pulse width range	1-400ms
  Spot size	12*20mm
  Frequency	1-10HZ
  Light spot surface temperature	0-30°C
  Cooling System	Semiconductor+built-in water+Air Cooling triple cooling systems
  Fuse specification	Ø5×25 10A
  Input Power	1000W
  Power	AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ

   

• Working Principle:

Semiconductor laser hair removal machine is freezing through technological innovation, so that the treatment of head to negative temperature, unlike other laser burns the skin, to better protect the skin, hair follicle melanin by specific wavelength of laser absorption, and the heat exchange to destroy hair follicle, the laser energy can be shot down into the hair follicles within the hair follicle is destroyed energy decomposition, so that the hair follicles to stop growing, because the laser energy about 15% of the skin can penetrate the dermis layer, the epidermis and more with melanoma of the hair follicle deep through the heat damage to hair follicle degeneration and atrophy; achieve permanent hair removal results.

• Detailed Pictures:

• The handle:

• Real pictures:

• Operation system: 

• Internal Parts:

• Before and after:

• Our service:

  1. We supply three years of warranty

  2. Any problems happen to machine within one year, we will help you fix it free of Charge.(except the intended damage and material loss)

  3. If some problems do happen to machine. first you need to give us some description of the problem, and then our Technician will carry up with solution within 2 working days. Also pictures or video will be sent to help you.

  4. At last, if serious problems, our Technician can fly to your clinic to handle the repair.

• Packing:

• FAQ

  1. How does the diode system remove hair?

  This laser targets the pigment located in the hair follicle and shaft. The light is absorbed

  by the pigment in the hair follicle and this energy is converted to heat which results in

  damage to the hair follicle. This damage causes delayed re-growth of hair and, in most

  cases, permanent destruction of many hair follicles. Unlike electrolysis, which disables

  one hair follicle at a time, the laser reaches and treats hundreds of follicles at a time.

   

  2. Does it hurt?

  The cooling tip has a mild aesthetic property, which allows tender areas to be treated in

  a relatively painless fashion.

   

  3. How many treatments will I need?

  We recommend six treatments. In fact, it is not uncommon for a person to need seven or

  more. There are a variety of factors that can influence the total number of treatments

  any individual may require to achieve the desired results.

   

  4. What about blonde / red / grey hair?

  The laser energy is attracted to the melanin in your hair. The greater the amount of

  melanin the better the results. White or grey hair does not contain any melanin,therefore

  does not respond to treatments.

   

  5. Do I need to grow the hair out before my consultation / treatment?

  No, in fact we ask that you do shave the area you want treated. We’re actually

  targeting the anatomical structures below the skin. Surface hair interferes with this process.

   

  6. How long before I see results?

  You will see some results immediately. It takes a week or two for all of the hair in the treated

  area to fall out. After that, you will experience several weeks of no growth in the treated area.

  So you’re receiving immediate gratification while you are moving toward your long-term goal.

   

  7. Can I be treated while taking medications?

  The only medications that are prohibited for Laser Hair Removal are Accutane and Retin-A,

  which must be discontinued prior to treatment. During your consultation,

  we’ll review any medications or supplements that you are currently taking to help determine

  the appropriate fluency for your treatment.

• Our Company:

Beijing Nubway S&T Development Co., Ltd was built in 2003, which is the professional manufacturer of beauty equipments forHair removal, Skin improving& skin diseasetreatment, body slimming, teeth whiteningand hair regrowth etc. Our factory has our own professional engineers, technicians, design team, assemble team, after-sales service team in regarding research and development department. This is the basis for our company to provide the OEM or ODM service for our distributors.

• Certification:

•  Welcome to our Factory:

• Contact us:

  Beijing Nubway S&T Co., Ltd 

  Mob & Whatsapp & Viber: +0086-15201538689 

  Web:  

  Tel: 0086-10-5120 6522 

  E-mail: jenny(@) 

  Skype: jennyliu891020