Product Details

The range of IPL treatment:

(1)Everlasting hair removal:remove unwanted hairs under arms,on legs ,lips or other body part,etc.

(2)Pigmentation treatment:remove various kinds of pigment such as freckle,chloasma,aged spots,sunburn,etc.

(3)Telangiectasis treatment:treat angiotelec-tasis.

(4)Acne treatment:papule,tuber,Blain,acne,etc.

(5)Shrink pores,tighten skin,improve skin elasticity and glossiness.

(6)Eliminate and smooth wrinkles,acne treatment.

Application:

1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

2015 latest Fractional CO2 laser Scar removal Skin Resurfacing Equipment

Product Description

What is Fractional Co2 Laser Scar removal Skin Resurfacing Equipment

Fractional co2 laser

This machine adopts Fractional Co2 laserusing the CO2 laser’s heat penetrating action, in the guidance of the scan precise scanning, 0.12mm diameter thin minimally invasive aperture was formed by lattice-shaped on the skin. Skin in the effect of the laser energy and heat, wrinkle or scar tissue was uniform gasified instantaneous and formed minimally invasive hole as the center of the micro-heating zone, so as to stimulate the skin synthesize a large number of new collagen tissue. and thus start the tissue repair, collagen rearrangement of a series of body's natural healing mechanisms. Fresh collagen random regenerate, make the treated area of skin becomes smooth, firm, elastic, pores shrink, wrinkle reduction , bags under the eyes disappear, the pigmentation disappear, superficial scar calm, skin texture and skin color gradually improved significantly.

Applications
Treatment theory
e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling
The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.

of Fractional Co2 Laser Scar removal Skin Resurfacing Equipment

• Fractional skin treatment has been used effectively to:

• Reduce lines and deep wrinkles on the face

• Tighten skin on the face and neck

• Change the appearance of scars

• Improve skin tone around eyelids, jowls and neck

• Rejuvenate sun-damaged skin and improve texture

• Remove pigmented lesions

• Improve tone and texture on the chest, arms, and hands

Advantage of Fractional Co2 Laser Scar removal Skin Resurfacing Equipment

1. Scan mirror:made in Germany, so the accuracy of the treatment is very good, the speed is fast, then the treatment is very good.

2. guide light arm: 7 joint articulated arm, high quality, accuracy is great.

3. power supply: high quality, and high power, , super pulse can reach 1000HZ/s, but lots of company only 500HZ/s. so the energy is high, treatment speed is fast, skin damage is small.

4. spot diameter is small, so the treatment spot is small, wound area is small, recover much fast

5. every spot is same, include the depth, size, and no miss spot in the treatment area, shape is not any distortion.

6. speed is more than 10m/s, so the thermal damage is small, and less pain.

7. density, depth, and shape, all can be adjusted, very convenient.

8. 7 different scan shape, adapt to different customer’s request.

9. distance: 0.1mm-2.6mm, lots of other company only reach 2mm.

10. power: 30W, but lots of company only 12W, 15W.

Specifications of Fractional Co2 Laser Scar removal Skin Resurfacing Equipment

Wavelength:	10600nm
Laser apparatus:	Sealed off laser device simulaste by current
Optical beam quality:	TEM00
Output:	30w
Spot size:	0.02~0.05mm2
Aiming beam:	Red semiconductor laser(635nm, less than 5mw)
Beam transport device:	Articulated arm with 7-joint and balance weight CO2 laser system The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis. The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
Working mode:	Continuous operation
Output made:	Continuous, single pulse, interval pulse and super pulse Principle of RF CO2 Fractional Laser CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. Fuctions and treatment effect of elight ipl rf 1.Permanent hair removal. 2.Smooth wrinkles, face-lifting 3.Deep flecks, epidermis flecks or pigment treating the telangiectasis 4.Promote collagen to grow, strengthen flexibility of skin 5.Acne treatment 6.Shrink the thick pore 7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal 8.For exogenous pigment: tattoo, eyeliner and eyebrow removal 9.Skin whitening 10.Striae gravidarum removal
Scan scope:	Max 20mmx20mm
Scan graphics:	Circle, triangle, square, rectangle, hexagon, elipsel, line
Scanning mode:	Random, normal and midsplit scan
Scanning speed:	More than 10m/s
Energy:	30w
Distance:	0.1-2.6mm
Cooling system:	Air circulation
Weight:	60kg
Dimension:	6548117cm

Product Details

MORE CHOICES

Click the pictureto get more detailed information about the another CO2 YAG Laser machine!

Packaging & Shipping

Company View

Why Choose us

We are China Leading Beauty Equipment Manufacturer For 12 years.
Alibaba Assessed 6 years
We have CE&Rohs Certification Approved.
100% QC inspection Before Shipment.
Best Quality & Best Service OEM&ODM with Competitive price.

How to Contact Us

Send your Inquiry Details in the Below, Click "Send

Main Technical Parameters:

Laser wavelength: 10.6µm

Laser unit:TEM00 module Co2 unit (best quality for the facula)

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm

Pulse width: the minimum pulse width is 0.1ms

The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.