Vagina Cleaning 2015 High Quality CO2 Fractional Scar Ultra Pulse Removal Fractional Co2 Laser Skin Resurfacing Equipment
USD $3,000 - $6,000 /Piece
Min.Order:1 Piece
Guangzhou T&B Beauty Equipment Co., Ltd.
fractional co2 laser vaginal tightening physiotherapy laser rf beauty device
vegina tightening products Co2 Fractional Laser Vaginal Tightening Device
2015 newest professional q switched nd yag laser tattoo removal machine beauty spa supplies
professional beauty Vertical q switched nd yag laser tattoo removal machine
birthmark eliminations q switched nd yag laser tattoo removal machine prices
CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
2015 High Quality CO2 Fractional Scar removal Fractional Co2 Laser Skin Resurfacing Equipment
Fractional co2 laser
This machine adopts Fractional Co2 laserusing the CO2 laser’s heat penetrating action, in the guidance of the scan precise scanning, 0.12mm diameter thin minimally invasive aperture was formed by lattice-shaped on the skin. Skin in the effect of the laser energy and heat, wrinkle or scar tissue was uniform gasified instantaneous and formed minimally invasive hole as the center of the micro-heating zone, so as to stimulate the skin synthesize a large number of new collagen tissue. and thus start the tissue repair, collagen rearrangement of a series of body's natural healing mechanisms. Fresh collagen random regenerate, make the treated area of skin becomes smooth, firm, elastic, pores shrink, wrinkle reduction , bags under the eyes disappear, the pigmentation disappear, superficial scar calm, skin texture and skin color gradually improved significantly.
• Fractional skin treatment has been used effectively to:
• Reduce lines and deep wrinkles on the face
• Tighten skin on the face and neck
• Change the appearance of scars
• Improve skin tone around eyelids, jowls and neck
• Rejuvenate sun-damaged skin and improve texture
• Remove pigmented lesions
• Improve tone and texture on the chest, arms, and hands
1. Scan mirror:made in Germany, so the accuracy of the treatment is very good, the speed is fast, then the treatment is very good.
2. guide light arm: 7 joint articulated arm, high quality, accuracy is great.
3. power supply: high quality, and high power, , super pulse can reach 1000HZ/s, but lots of company only 500HZ/s. so the energy is high, treatment speed is fast, skin damage is small.
4. spot diameter is small, so the treatment spot is small, wound area is small, recover much fast
5. every spot is same, include the depth, size, and no miss spot in the treatment area, shape is not any distortion.
6. speed is more than 10m/s, so the thermal damage is small, and less pain.
7. density, depth, and shape, all can be adjusted, very convenient.
8. 7 different scan shape, adapt to different customer’s request.
9. distance: 0.1mm-2.6mm, lots of other company only reach 2mm.
10. power: 30W, but lots of company only 12W, 15W.
Wavelength: | 10600nm |
Laser apparatus: | Sealed off laser device simulaste by current |
Optical beam quality: | TEM00 |
Output: | 30w |
Spot size: | 0.02~0.05mm2 |
Aiming beam: | Red semiconductor laser(635nm, less than 5mw) |
Beam transport device: | Articulated arm with 7-joint and balance weight |
Working mode: | Continuous operation |
Output made: | Continuous, single pulse, interval pulse and super pulse |
Scan scope: | Max 20mmx20mm |
Scan graphics: | Circle, triangle, square, rectangle, hexagon, elipsel, line |
Scanning mode: | Random, normal and midsplit scan |
Scanning speed: | More than 10m/s |
Energy: | 30w |
Distance: | 0.1-2.6mm |
Cooling system: | Air circulation |
Weight: | 60kg |
Dimension: | 65*48*117cm |
Click the pictureto get more detailed information about the another CO2 YAG Laser machine!
Send your Inquiry Details in the Below, Click "Send Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
Theory - co2 fractional laser