Specifications

RTC80 digital thermostat
home,floor heating parts
used for 2-position control
NTC sensor,

RTC80.XXX Weekly Programmable Thermostat

  

 

Introduction

The RTC80.XXX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat
The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

Application

For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...

  

Features

On/off control output for heating device
Symbol indicator when heating is on
Temperature limitation function for protecting the wooden floor
Current room temperature displaying when the thermostat is switched-off
“Key-lock” function for protecting the setted parameters (especially suitable for Public Places)

  

Technical data

Voltage: AC230V

Power consumption: 3.5W
Switching differential: ±0.5K
Protective housing: IP20
Housing material: self-extinguishing PC
Floor sensor: rubber-thermoplastic NTC sensor,
cable length is 3m

 

Selection table

Model No.	Current	Sensor	Temperature limitation function	Key-lock function	Potential-free output	Loading (PCS/Carton)
RTC80.113	3A	Built-in & floor sensor (optional)	Yes	Yes	No	64
RTC80.713	3A	Built-in & floor sensor (optional)	Yes	Yes	No	64
RTC80.116	16A	Built-in & floor sensor (recommend)	Yes	Yes	No	64
RTC80.716	16A	Built-in & floor sensor (recommend)	Yes	Yes	No	64