Specifications

1.Limestone crusher for Cement plant
2.ISO9001:2008&SGS certified
3.High efficiency crushing ratio
4.Easy and safe operation

Limestone Crusher Used in Cement Plant for Ecuador

  

Limestone Crusher for Cement Plant for Nigeria - Introduction

DPX series single-stage fine hammer crusher is the single-stage crushing of the brittle material with middle hardness. It can replace the traditional threes-stages crushing system, and widely used in the cement, artificial sand, ceramic, glass, coal, metalloid mine and new green building materials industries. It can handle coarse, middle and fine material with one step, the investment can be reduced by 35-50% than the cost of traditional secondary or three stages.
 

Limestone Crusher for Cement Plant for Nigeria - Performance Features

1. Large feeding size(-1300mm, +500mm), fine discharging size (D80≤ 8mm), High capacity and large crushing ratio.

2. Hammer head is made of AMC composite material which is developed by our company independently. The service life of the hammer is 50-150% longer than the hammer which is made from Mn18Cr2MoNbRe.

3. Low power consumption, easy maintenance and low operation expense, can save the management fee by 30-40%.

4. When it used for the sandstone material crushing, the discharging size can be adjust from 3-30mm.

5. Simple process flow, the floor area can be reduced by 40-60%

6. The discharging grid plate is adjustable, it can adjust the product size and meet the different requirement of clients.

7. The service life of the wear parts is very long, Maintenance frequency is greatly reduced.
 

Limestone Crusher for Cement Plant for Nigeria - Working Principle

The large material is fed into the cavity, then stacked on the airframe in the machine. The hammer are working in the middle of the gaps in bracket, breaks the material continuous and fall down, the small material is stroke again by the high-speed hammer, finally discharging from the grid plate.
 

Limestone Crusher for Cement Plant for Nigeria - Technical Parameters

 

Type	Rotor Size (mm*mm)	Hammer Quantity	Feeding size (mm)	Output size (mm)	Capacity (tph)	Power (KW)	Feeder Size (mm*mm)
DPX-15	800*650	12	≤ 500	Dave. ≤ 5	15-35	35-55	570*630
DPX-35	1000*1030	24	≤ 700	Dave. ≤ 5	30-40	55-75	1050*760
DPX-65	1200*1290	28	≤ 800	Dave. ≤ 5	55-75	90-132	1320*760
DPX-90	1400*1300	24	≤ 900	Dave. ≤ 5	80-100	132-160	1330*960
DPX-125	1400*1700	48	≤ 1000	Dave. ≤ 8	110-130	200-240	1790*960
DPX-150	1600*1560	50	≤ 1100	Dave. ≤ 8	140-160	240-280	1900*960
DPX-180	1600*2020	54	≤ 1100	Dave. ≤ 10	160-200	280-355	2050*1200
DPX-250	1800*2000	60	≤ 1100	D80≤ 10	230-280	440-550	2150*1400
DPX-300	2000*2200	66	≤ 1100	D80≤ 10	280-350	440-550	2300*1600