Car Seat Mini Bus Taxi Sensor Passanger seat pressure Sensor
USD $10 - $15 /Piece
Min.Order:100 Pieces
Nanchang Qinglin Machinery Factory
Occupancy car seat gps tracking device safety sensor
Touch point sense
Universal for cars,taxis,buses
New type sensor
Occupancy sensor sample is available
Can be used for GPS tracking system,safety belt,any kind of auto seats. The touch point sensor can feel if there is person on the seat or not. Quite useful and most popular sensor.
Performance Parameters Table | |||||
Parameter | Condition | Sign | Numerical Value | Unit | |
Min | Max | ||||
Working Voltage | U working | 0 | 20 | V | |
Working Current | I Working | 0 | 50 | mA | |
Non-trigger resistance value | No load | Rx=R No load | 10.0K | Ω | |
Trigger resistance value | Bearing body | Rx=R Trigger | 0 | 100 | Ω |
Insulation impedance | No load | Rx=R No load | 10 | 20 | MΩ |
Specification | |||||
Material | PC | ||||
Material surface thickness | 0.188mm | ||||
Output Signal | Resistance<100Ω | ||||
Film thickness | 0.5+-0.1mm | ||||
Bottom glue | PET 3MDouble-sided glue | ||||
Enviroment Temperature | -15°C-80°C | ||||
Permanence | >150000 Time | ||||
Pressure range single-spot test(Special Poise) | 70g | 100%non-conducting | |||
130g | 100%conducting | ||||
Connector | Seal gum | ||||
To match as the seat |
2.Sample Policy
we do not supply free sample. If you need sample, you should pay for the sample cost and express fee.
For the sample charge, we will refund to you in future order.
3.Attention
A:When you order the seat, please info us the mounting size.
B:we pack by carton, if delivery by LCL, we suggest our customers pack by pallet. And the customers should pay for the pallet.
Normally, one pallet can load 8 or 12 cartons.
FAQ:
1.What is the Minimum Order?
Our minimum quantity is 50pcs.
2.How long is the delivery time?
Normally 15-25 days after get the payment.
3.What is your nearest port?
Ningbo or Shanghai port
4.What is your payment term?
T/T in advance or LC(for big order)
5. How to delivery?
for several piece, you can choose by air
above 20 pcs, you can choose by sea.
6. What about the warranty?
1 year limited warranty
7. How long to prepare a sample ?
For forklift seat, it need about one or two weeks prepare the sample.
For heavy equipment seat with suspension, it need about 20 days.