Occupancy safety sensor for car seats,taxi seats
Negotiable /Piece
Min.Order:100 Pieces
Nanchang Qinglin Machinery Factory
Occupancy safety sensor for car seats,taxi seats
Can be used for GPS Tracking device
Safety Seat sensor samples are available
Can recognise if there is person on the seat or not,Universal used for car and taxi seats
Performance Parameters Table | |||||
Parameter | Condition | Sign | Numerical Value | Unit | |
Min | Max | ||||
Working Voltage | U working | 0 | 20 | V | |
Working Current | I Working | 0 | 50 | mA | |
Non-trigger resistance value | No load | Rx=R No load | 10.0K | Ω | |
Trigger resistance value | Bearing body | Rx=R Trigger | 0 | 100 | Ω |
Insulation impedance | No load | Rx=R No load | 10 | 20 | MΩ |
Specification | |||||
Material | PC | ||||
Material surface thickness | 0.188mm | ||||
Output Signal | Resistance<100Ω | ||||
Film thickness | 0.5+-0.1mm | ||||
Bottom glue | PET 3MDouble-sided glue | ||||
Enviroment Temperature | -15°C-80°C | ||||
Permanence | >150000 Time | ||||
Pressure range single-spot test(Special Poise) | 70g | 100%non-conducting | |||
130g | 100%conducting | ||||
Connector | Seal gum | ||||
To match as the seat |
Payment Term:
We accept T/T,L/C,Western Union as the payment,usually 15-20days after the deposit.
Sample policy: We can send you samples for testing,you just need to pay for the sample and the shipping cost.