ac dc rohs adapter charger 100-240v 12v 4a /5a/6a /7.5a/8.33a

Specification :

INPUT REQUIREMENTS:

• Operating range: 90-264VAC
• Rated Input Voltage :100-240VAC
• Input Frequency Range: 50/60Hz +/-3Hz

• Input In-rush Current: 30A max

• Input Current:1.48A max

OUTPUT REQUIREMENTS:

Output Voltage and Current 

Output Voltage Regulation

The total output voltage regulation shall be +/-5%,including the effects of line voltage variations,load current,ripple and noise,and the AC component of the load current.

Output Voltage Ripple

The switching power supply shall not exceed the following limits in the indicated voltage for 60Hz or 50Hz ripple,switching frequency ripple and noise measured with 20MHz width. Ripple and Noise:50/60Hz Ripple + Switching Ripple and Noise

Ripple and Noise are measured at the end of output cables which are added a

0.1uF(104) Ceramic capacitor and a 22uF Electrolytic capacitor.

EFFICIENCY:

When 120VAC line input voltage (100-240 VAC),the efficiency shall be >83% at rating load.

DIELECTRIC STRENGTH (Hi-Pot) TEST:

Finished product withstands with AC3000Vrms/50Hz,5mA max,

primary to secondary, 1 minute for type test,1 second for production test.

INSULATION RESISTANCE:

Primary to secondary: 10MΩ min at 500VDC. 

PROTECTION:

Short Circuit Protection

 If short circuit occurs,all the output should be protected. After the fault, the adapter automatically recovers.

Over Shoot

The Output over shoot at turn-on shall not exceed 10% of normal voltage value with or without the load connected.

Start-up time

The start-up time is less than 2 second.

ENVIRONMENTAL CONDITIONS:

Temperature

Operating temperature:  0℃  to  +40℃ , Storage temperature :  -20℃ to  +60℃

Humidity

Relative humidity:≤95%

Operating Ambient Altitude

Altitude:0-3000m

Operating at the lower temperature

At -0℃,with the rated voltage 100-240Vac charged to the primary and unloaded and full load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery  at the room temperature.

Operating at the high temperature

At +40℃,with the rated voltage 100-240Vac charged to the primary and unloaded and full Load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery  at the room  temperature.

COOLING:

Cooling shall be with natural convection cooling.

Burn-in

The burn-in test will be performed at least 4 hours at centigrade

degrees under full load Condition.

Referenced standard:

EMI Standards

Reference  EN50082-1,EN55022-B,GB-17625.1-2003, GB-9254-1998

Safety Standards

The adapter shall be meet certified with the following safety standards.

UL60950-1,EN60950-1,EN61347-1,EN61347-2-13,GB4943-2001

MOUNTING CONNECTORS: 

DC Output Cable

Wire : (Optional)SPT-1  18AWG*2C L=1200mm Color: Black

Plug : (Optional) 5.5 x 2.1x 10mm  

MECHANICAL FEATURES:

Dimension(Size)

Length: 152.5mm

Width: 60mm

Height: 35mm

Vibration and shock

No Evidence of any mechanical or functional damage after the vibration and shock testing. 

DIAGRAM DATA:( See to attach the diagram)

APPEARANCE DRAWING:(Unit:mm)

DIMENSION OF OUTPUT PLUG & DC CORD:(Unit:mm)

Remarks: 

• SPT-1  18AWG*2C  L=1200mm      Color: Black

•  

   PLUG:  5.5*2.1*10mm

DIMENSION OF INPUT PLUG & AC CORD:(Unit:mm)

• Spec:3pin  (UL  PIN)  L=1200m,  Color:Black.
• PLUG: C14 plug   Color:Black