Name: LDH plough mixer, Horizontal plough mixer
Brand: shengli
Availability: InStock

Product Details

LDH plough mixer, Horizontal plough mixer:

Product Description

A. Features:

1. Plough mixer
2. CE, ISO, SGS, BV approved;
3. Wide application in: Powder and liquid mixing (like Food, Pharmaceutics; Agriculture; Dyestuff; Chemicals), small fiber, and paste with low viscosity

B. General Introduction:
Plough mixer is characterized by high mixing precision, and wide application to food, chemical industries, and building lines. The major sections of a mixer are barrel, plough shears, feeding ports, discharging port and driven unit!!
Plough shear or sloping blade is set on the main shaft. When the plough shear mixer is on operation, the special mixing structure makes the material to be mixed continuously! The dead corner is absolutely avoided under the simultaneous radial and longitudinal movement, thus high accuracy mixing effect is achieved!
Our plough shear mixer can be equipped with heating or cooling jacket if temperature control is required. Besides, all of our powder mixer can tolerate about 10% liquid additives! We will add spraying or atomizing unit inside the tank!

/watch?v=eCm8KGLdItU

specifications

C: data sheet

specification	LDH-0.3	LDH-0.5	LDH-1	LDH-2	LDH-3	LDH-4	LDH-6	LDH-8	LDH-10	LDH-15
working capacity(m³)	0.18	0.3	0.6	1.2	1.8	2.4	3.6	4.8	6	9
working capacity (KG)	200	300	600	1200	1800	2500	3600	5000	6000	9000
speed (R/min)	130	130	85	63	63	42	42	33	33	28
power (KW)	5.5	7.5	11	15	22	30	45	55	75	90
weight	550	800	1000	1800	2500	3500	4200	4800	5800	7000
length	2200	2700	3200	4100	4350	4700	5400	6500	5600	6000
width	900	980	1000	1250	1450	1500	1700	2200	2500	2800
height	900	1200	1350	1600	1800	1950	2300	2600	2900	3000

configurations

C. Standard configuration:
1. Drive Unit: Cycloid reducer or gear reducer
2. Motor brand: Siemens (made in China)
3. Gear box brand: Chinese Famous brand (Huaxing)
4. Bearings: Chinese Famous brand
5. Discharging valve: pneumatic flap valve (no dead angle when mixing).
6. Main Shaft Seal
Air-purged seal and stuffing seal for powder material
Mechanical seal for liquid material
7. Voltage and Hz
380V 3Phases 50hz or in accordance with it in the using place
8. Top Cover
Could be fully open so as to clean, with safety grid and limit switch to make sure safety operation for workers
9. Normal duty type: start the mixer first and then load the material
10. Surface treatment: painting, polishing, passivation, blasting, acid-picking and so on
11. Packing in pallet or wooden case

D.Additional configuration:
1. Driven unit: Many worldwide famous brands are for option: SEW, ABB, Siemens and so on
2. Bearings: NSK/TNT and so on
3. Heating/cooling jacket: water, oil, steam as the cooling or heating medium
4. Spraying system
5. Heavy duty type ( loading your material into the mixer first and then start the mixer)
6. Platform: we build the platform for you or we design it and you build it locally
7. Mixing system: including packing machine, bucket elevator, Sieve, screw conveyor and so.
8. Customizing according to client’s specific requirement
9. High speed choppers can be added inside the mixing tank to promote the mixing effect

E: major parameters for technology selection

1. powers name and character (mesh and density)

2. output per batch

3. stainless steel 304/316LL or carbon steel

4.the electrialenviroment in machine's using place

F: mixers need to be customized according to the different cases, the cases are as below:
1. Agglomerated material larger than 5mm is contained in the raw material
2. Bulk density of the raw material bigger than 3kg/l
3. Materials that are easy to get damp and not allowed to be exposed to the atmosphere, the mixer need to be vacuumized or negative pressure
4. Fill compressed air to the mixer barrel, and keep the pressure
5. Material with a large friction coefficient, mixer need to do a special Wear-resistant surface treatment
6. Material is not allowed to contact with the metal surface during mixing process
7. Mixer need to be heated up to 200 Celsius degree
8. Heavy duty (loading material into mixer before turning on it) is required.

pictures