Tire manufacturing equipment-tyre curing press
USD $80,000 - $180,000 /Set
Min.Order:1 Set
Qingdao Plastsea International Trade Co., Ltd.
Curing press for tyre
We can supply the curing press for PCR tyre, Agricultural tyre, OTR tyre, TBR tyre,etc.
Type: Mechanical type and Hydraulic type
BOM, A, AB
Size of curing press: 40"45"46"48"55"62.5"65"75"85",etc
Our curing presses are supplied for many famous tyre factories around the world, like Michelin, Bridgestone, etc.
We welcome your visiting to our factory for further discussion,
Below is example parameters:
Mechanical Type
Item | Unit | Specification | ||||||
B1600 | B1665 | B1750 | ||||||
Curing cavity No. |
| 2 | 2 | 2 | ||||
ID of Mould shield | MM | Φ1600 | Φ1665 | Φ1750 | ||||
Max squeezing force | KN | 3800x2 | 3800x2 | 4600x2 | ||||
Height of mould | MM | 400-700 | 400-700 | 400-700 | ||||
Center Mechanism |
| BOM(water hydraulic) | BOM(water hydraulic) | BOM(water hydraulic) | ||||
Diameter of suitable tyre bead | Inch | 20-25 | 20-25 | 20-25 | ||||
Max O.D. of cured tyre | Segmented mold | MM | 1135 | 1200 | 1300 | |||
Two piece mold | MM | 1235 | 1300 | 1400 | ||||
Max section width of cured tyre | MM | 500 | 500 | 500 | ||||
Max height of green tyre | MM | 650 | 650 | 600 | ||||
Designed mould open/close time | S | 90/50 | 90/50 | 90/50 | ||||
Max load of VCL | Kg | 150 | ||||||
Max weight of mold | Kg | 6500 | ||||||
High pressure oil pressure | Mpa | 16 | ||||||
Low pressure oil pressure | Mpa | 8 | ||||||
Max external pressure | Mpa | 1.4 | ||||||
Max internal pressure | Mpa | 2.8 | ||||||
Hydraulic water pressure | Mpa | 2.1 | ||||||
Compressed air pressure | Mpa | 0.7 | ||||||
Control air pressure | Mpa | 0.35 | ||||||
PCI inflation pressure | Mpa | 0.7 | ||||||
|
|
|
|
|
|
Hydraulic Type
Item | Unit | Specification | |||
B1145 | B1220 | ||||
Curing cavity No. |
| 2 | 2 | ||
ID of Mould shield | MM | Φ1145 | Φ1220 | ||
Max squeezing force | KN | 1360x2 | 1960x2 | ||
Height of mould | MM | 220-440 | 300-560 | ||
Center Mechanism |
| BOM(Oil hydraulic) | BOM(water hydraulic) | ||
Diameter of suitable tyre bead | Inch | 13-18 | 13-20 | ||
Max O.D. of cured tyre | Segmented mold | MM | Φ760 | Φ860 | |
Two piece mold | MM | Φ820 | Φ900 | ||
Max section width of cured tyre | MM | 300 | 350 | ||
Max height of green tyre | MM | 440 | 600 | ||
Designed mould open/close time | S | 30/26 | 30/26 | ||
Max load of VCL | Kg | 50 | 80 | ||
Max weight of mold | Kg | 2700 | 4500 | ||
High pressure oil pressure | Mpa | 16 | |||
Low pressure oil pressure | Mpa | 7 | |||
Max external pressure | Mpa | 1.4 | |||
Max internal pressure | Mpa | 2.8 | |||
Hydraulic water pressure | Mpa |
| 2.1 | ||
Compressed air pressure | Mpa | 0.7 | |||
Control air pressure | Mpa | 0.35 | |||
PCI inflation pressure | Mpa | 0.7 | |||
PCI rim width | Mm | 100-280 | 100-330 |
If you need more details, please contact us!
We welcome your visiting to our factory.