Tire Vulcanizer
USD $120,000 - $180,000 /Set
Min.Order:1 Set
Qingdao Plastsea International Trade Co., Ltd.
Mechanical Tyre Vulcanizer for PCR/LTR Tyre
This vulcanizer is used for vulcanizing the PCR./LTR tyre. BOM type.
Item | Unit | Specification | |||
B1145 | B1220 | ||||
Curing cavity No. |
| 2 | 2 | ||
ID of Mould shield | MM | Φ1145 | Φ1220 | ||
Max squeezing force | KN | 1360x2 | 1960x2 | ||
Height of mould | MM | 220-440 | 300-560 | ||
Center Mechanism |
| BOM(Oil hydraulic) | BOM(water hydraulic) | ||
Diameter of suitable tyre bead | Inch | 13-18 | 13-20 | ||
Max O.D. of cured tyre | Segmented mold | MM | Φ760 | Φ860 | |
Two piece mold | MM | Φ820 | Φ900 | ||
Max section width of cured tyre | MM | 300 | 350 | ||
Max height of green tyre | MM | 440 | 600 | ||
Designed mould open/close time | S | 30/26 | 30/26 | ||
Max load of VCL | Kg | 50 | 80 | ||
Max weight of mold | Kg | 2700 | 4500 | ||
High pressure oil pressure | Mpa | 16 | |||
Low pressure oil pressure | Mpa | 7 | |||
Max external pressure | Mpa | 1.4 | |||
Max internal pressure | Mpa | 2.8 | |||
Hydraulic water pressure | Mpa |
| 2.1 | ||
Compressed air pressure | Mpa | 0.7 | |||
Control air pressure | Mpa | 0.35 | |||
PCI inflation pressure | Mpa | 0.7 | |||
PCI rim width | Mm | 100-280 | 100-330 |
If you need more details, please contact us.