Specifications

1.type:Q/QP
2.ulitmate strenght:70-300kn
3.body materal:galvanized steel
4.weight:0.3-1.5kg

Q/QP Type Ball-Eyes
1.type:Q/QP
2.ulitmate strenght:70-300kn
3.body materal:galvanized steel
4.weight:0.3-1.5kg

Q/QP Type Ball-Eyes

 •Applaication:

Line Hardware fittings are used to connect insulators to the towers and conductors

•material:

1.The forged hardware is mainly made of heat treated steel.

2.This steel is especially suitable for forging and its good performance, especially ductility, is due to the heat treatment process

3.The short circuit capability of the Line Hardware fittings depends on the cross sections used as well as the smoothnessof bolts and holes and on the mechanical load applied.

4.One should keep in mind that at higher temperatures the strength of the hardware will be reduced.

5.Split pins are made of stainless steel or tinned copper

6.Dimensions of other connections are shown in the relevant catalogue section, but also others are available on request.

7.Body : Galvanized steel

•Standards: The connecting bolts are grade 4.8 or 8.8.

 •Specifications:

type	Dimensions(mm)					Designated size of coupling	Rated failure load(KN)	Weight(kg)
	d	Φ	b	d 1	h
Q-7	17	22	16	33.3	50	16	70	0.3
QP-7	17	20	16	33.3	50	16	70	0.3
QP-10	17	20	16	33.3	50	16	100	0.3
QP-12	21	24	20	41.0	60	20	120	0.5
QP-12G	17	24	17	33.3	60	16	120	0.4
QP-16	21	26	20	41.0	60	20	160	0.5
QP-16G	21	26	18	41.0	60	20	160	0.5
QP-20	25	30	24	49.0	80	24	200	1.0
QP—21D	21	30	24	41.0	70	20	210	0.9
QP-30	25	39	28	49.0	80	24	300	1.1
QP-2120G	21	26	20	41.0	80	20	210	0.7
QP-3224G	25	33	28	49.0	80	24	320	1.2
QP-4228G	29	39	32	57.0	100	28	420	1.5