Specifications

laser cutter for car carpet
1,High speed laser cutting engraving
2,Red light position
3,No burnt edge
4,Auto feed

Laser Cutter for Car Carpet, Floor Mat, Logo Rug

 

Why choose laser machine for carpet cutting?

Cutting commercial and industrial carpet is another great CO2 laser application. In many cases, synthetic carpet is cut with little or no charring, and heat generated by the laser acts to seal edges to prevent fraying. Many specialized carpet installations in motor coaches, aircraft, and other small square-footage applications benefit from the precision and convenience of having the carpet precut on a large-area flatbed laser cutting system. Using a CAD file of the floor plan, the laser cutter can follow the outline of walls, appliances, and cabinetry – even making cutouts for table support posts and seat mounting rails as required. 

 

The carpet laser cutting machine could cut different format and different sizes of all carpet materials. Its high efficiently cutting performance will improve your production quantity, save time and save cost.

Applications:  

Laser machine suits for cutting  wool carpet, polypropylene carpet,woven carpet,rug,tapestry,tufted carpet,yoga mat,restaurant carpet,living room carpet,corridor carpet,wool axminster carpet,decorative wool and nylon rug,cut pile carpet,floor area carpet,office carpet,logo carpet,woolen hospitalities rug,hotel carpet,banque hall carpet,decorative tapestry,commercial carpet, polyester shaggy carpet,silk shaggy rugs, wilton mat,blend carpet,woolen carpet,non-woven carpet,wall to wall carpet,fiber carpet,indoor carpet,outdoor carpet,floor rug,custom mat,carpet tile. Car/automotive/plane/aircraft carpet.

 

Laser machine applied in carpet industry

Application I: wall to wall carpet

Customer demand: for wall to wall carpet, the main technique is engraving lines (PLT graphic), non-woven material has the best engraving result

Application II: door mats

Customer demand: engraving and cutting

Engraving: adopts Galvo series models to engrave different images ( PLT or BMP file) with high speed, suitable for engraving individualized door mats and foot mats.

Unconventional carpet and mosaic carpet cutting.

Application III: automobile or aircraft special carpet

Application VI: carpet tile

Customer demand: cutting

Model recommendation : single head or double head laser cutter (150W, 200W or 400W) with auto-feeding system.

Recommend model 1: CJG-210300LD Carpet Laser Cutting Machine

Specifications:

1, It has open design and the processing format can reach to 2100mm × 3000mm.Optional servo motor device is efficient and the processing effect is good.

 

2, It is particularly suitable for large format continuous lines engraving and all kinds of carpet materials cutting.

 

3, It adopts pedrail working table with the auto feeding device (optional) and can do fast continuous cutting on the carpet materials. 

 

4,The cutting system can do super-long nesting and full format cutting on a single pattern that is longer than the cutting format of the machine.

 

5,Optional smart nesting software can do fast and material-saving nesting on the graphics to be cut. 

 

6, 5 inch LCD screen CNC operating system supports multiple data transmission mode and can run in offline and online modes.

 

7, Servo top exhaust suction system enables the laser head to be synchronized with the exhaust suction system, of which the suction effect is good and saves energy.

 

8, It is equipped with red light positioning device which prevents position deviation of the material in the feeding process and ensures high processing quality.

 

9, Users can also choose formats of 1600mm × 3000mm (CJG the-160300LD II), 4000mm x 3000mm (CJG the-400300LD II), 2500mm × 3000mm (CJG-250300LD) working table and also other customized format of working table.

 

Technical Parameter

Laser types	DC glass laser tube
Laser power	130W
Cutting area	2100×3000mm
Working table	Pedrail working table
Working speed	Adjustable
Positioning accuracy	±0.1mm
Motion system	Offline mode servo motor system control system, 5 inch LCD screen
Cooling system	Constant temperature water chiller
Power supply	AC220V ± 5% 50HZ
Format supported	AI, BMP, PLT, DXF, DST etc.
Standard collocation	A set of 550W top exhaust suction machine and two sets of 3000W bottom exhaust suction machines and micro air compressor
Optional collocation	Auto-feeding system, red light positioning, RF metal laser tube(150W)

 

Recommend model 2: CJGS-250300LD High speed Carpet Laser Cutting Machine

Specifications:

1.It adopts double Y-axis structure and flying laser beam route. It is equipped with a servo motor and processing speed is fast.

 

2.It adopts 300W CO2 RF metal laser tube. It can do high speed and high accuracy cutting for varieties of carpet materials within large format of 2500mmX3000mm.

 

3.Cutting speed can reach 1200mm/s. It is two time faster than normal cutting machine. It has especially better effect for small graphics.

 

4.Smart nesting software (optional), Increasing utilization rate of carpet materials to the maximum and saving cost.

 

5.The cutting system can do super-long nesting and full format cutting on a single pattern that exceeds the cutting area if machine.

 

6.5 inches LCD screen CNC system supports multiple data transmission mode and can run in offline and online modes.

 

Recommend model 3: CJG-250120LD Carpet Laser Cutting Machine

Specifications:

1.It is especially developed for carpet industry. It can do cutting and mosaic cutting on a variety of carpet materials to enhance the beauty and value-added of the products and meet the different needs of customers.

 

2.It adopts middle format cutting area, It is cost-effective and can meet a various of specifications of carpet processing.

 

3.It adopts conveyor working platform with automatic feeding device, which enable automatic batch processing.

 

4.It has good exhaust suction effect and overcomes problems of cutting smell. It is environmental friendly and safe.

 

Recommend Mode 4: ZJ(3D)-160100LD High Speed Carpet Laser Engraving Machine

Specifications:

• It adopts world advanced galvanometer triaxial dynamic processing system and the processing speed is fast.
• It is especially suitable for blankets in roll and carpet in sheet high speed and high precision engraving.
• It has Co2 150W RF metal laser tube. If equipped with auto-feeding system, it can continuous engrave on all kinds of roll materials within 1600mm wide.
• Users can select the slightest light spot, the strongest intensity and the most accurate positioning mode to process on materials according to processing format. It improves products quality added value.
• 5-inch LCD screen CNC control system; multiple data transmission mode supported; offline and online modes of operation for option.
• Zinc-Fe honeycomb working table for option.

Application:

Non-woven, polypropylene fiber, cospinning etc. All kinds of carpet, rug, mat materials.

  

Technical Parameter

Laser types	CO2 RF metal laser tube
Laser power	150W
Cutting area	1600mmX1000mm
Working table	Pedrail working table
Working speed	Adjustable
Positioning accuracy	±0.05mm
Motion system	Offline mode servo motor system control system, 5 inch LCD screen
Cooling system	Constant temperature water chiller
Power supply	AC220V ± 5% 50Hz
Format supported	AI, BMP, PLT, DXF, DST etc.
Standard collocation	Three set of 550W top exhaust suction machine
Optional collocation	Auto-feeding system, Co2 RF metal laser tube(100W), Zinc-Fe honeycomb working table

 

Carpet Laser Cutting Sample Gallery: