HDMI Matrix, buy Best price 4 by 2 HDMI Matrix with Dual ARC on China Suppliers Mobile

Product Details

4 by 2 HDMI Matrix with Dual ARC

Product Description

Introduction

This is a high performance HDMI Matrix with four HDMI inputs & two outputs, it allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on the any of the two displays simultaneously, and supports 4K×2K, 3D, 12-bit Deep Color. With its 3Gbps bandwidth and the additional features of the latest HDMI standards you can be sure of great HDMI distribution. It support dual ARC and wide band IR extend fuciton also.

Feature

Compliant with HDMI 1.4,HDCP 1.4
Supports multiplexed HDMI 4-input and 2-output
Supports video format up to 4k2k@30Hz with 24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2,and up to 4k2k@60Hz with 12bit YCBCR 4:2:0.
Deep Color support 48/36/30/24-bit
Supports reception of any audio data conforming to the HDMI specification such PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.
Supports Dual ARC control
Super wideband IR control system, IR transport channel can be forward or backward.
Supports button,IR,RS232 etc various controlled ways.

Specification

Video Bandwidth 297MHz/2.97 Gbps

Input Ports 4 × HDMI (Female type)

Output Ports 2 × HDMI (Female type)

Output Resolution 480i ~1080p50/60, 4Kx2K@24/30, VGA~UXGA

HDMI Cable In 1080p/12bits (15m)

HDMI Cable Out 1080p/12bits (15m)

ESD Protection Human Body model:±8 kV (air-gap discharge)

±4 kV (contact discharge)

Power Supply 5 V/1A DC (US/EU standards, CE/FCC/UL certified)

Dimensions 113 mm (W) × 260 mm (D) × 26 mm (H)

Weight 750 g

Chassis Material Metal

Silkscreen Color Black

Operating Temperature 0 °C~40 °C/ 32 °F~104 °F

Storage Temperature −20 °C ~ 60 °C/−4 °F ~140 °F

Relative Humidity 20~90 % RH (non-condensing)

Power Consumption 2.0 W

Operation and Fuctions

5.1 Front panel

ON/OFF: Power on/off switch.
POWER LED: This red LED illuminates when the device is connected with power supply.
IR : Remote control receiverwindow.
OUT A: These red LED illuminates when the output A channel select to the corresponding input.
OUT B: These red LED illuminates when the output B channel select to the corresponding input.
ARC: Press these button to select OUT A or OUT B Coaxial audio from source or HDTV .

ARC fuciton : If you need use ARC,your HDTV must support this fuction, When you open the ARC fuciton,the Coaxial of the matirx will output the HDTV current display content audio. Otherwise will output the matrix input source audio.

7. RST BUTTON: Press this button the matrix setting will recover to factory state.

Rear panel

RS232: Connect the RS232 port to the PC or notebook by RS232 Cable to control the matrix.
Input: These slot is where you connect the HDMI source output from DVD, PS3,Set-top Box or Note Book.
IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.
IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.
OUT B: The HDMI is where you connect the HDTV or monitor with HDMI cable for input source display.The Coaxial audio output is where you connect to the amplifier with coaxial cable.
OUT A: The HDMI is where you connect the HDTV or monitor with HDMI cable for input source display.The Coaxial audio output is where you connect to the amplifier with coaxial cable.
DC 5V: Plug the 5V1A DC power supply into the unit and connect the adaptor to AC wall outlet.

Connect and Operate

1. Connect the signal sources such as Blu-Ray Player, Play Station 3, audio/video receiver, satellite receivers and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI Matrix inputs.

2.Connect the HDMI output from the HDMI Matrix to a high-definition display device such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cables that are recommended for the distances that are required for each connection.

3.The Matrix is powered by an external power supply which is included. Connect power first to the source, then to the Matrix and then to each HD TV or projector.

4.The input source can be controlled from the display. This is accomplished by using an optional IR Receiver pigtail pointing away from the display(s), which can be connected with the optional HDMI IR Adapter, and inserted between the HDMI cable connector and the display with the toggle switcher at the “IR” position. The IR Transmitter pigtail is then connected to the Matrix and pointed to the source(s). A remote control is used at the display to select switch inputs and output.The matrix also have the capability of being controlled via Remote control.

Wideband IR(30KHz---60KHz) introduction

IR BLASTER (TX)

To control the source: Plug IR Blaster into IR TX port of transmitter unit; place blaster in front of the IR eye of the source.

IR RECEIVER (RX)

To control the source: Plug IR Receiver into IR RX port of receiver unit; place receiver at or near display.

Remote Control

OUTPUT A: Press IN1IN2IN3IN4 button will fast switch to select input source to HDMI OUTPUT A, and the LED will indicate the corresponding input source. Press button OUTPUT A will cycle from input IN1IN2IN3IN4.

OUTPUT B: Press IN1IN2IN3IN4 button will fast switch to select input source to HDMI OUTPUT B, and the LED will indicate the corresponding input source. Press button OUTPUT B will cycle from input IN1IN2IN3IN4.

Connection Diagram

Packaging & Shipping

Packaging