Product Details

HDMI Fiber Optical Extender over 3300feet/1000meters

Product Description

Introduction

The HDMI Fiber Optical Extender is a tool which can extend your HDMI signal over 3300feet/1000meters to a compatible display. This product works with any HDMI source and supports resolutions up to 4K Ultra HD. It also supports Transfer Bidirectional Infrared control signal and RS232 control signal. So you can control the Source from the Sink side which is 3300feet/1000meters outside, also you can control the Sink from the Source side which is 3300feet/1000meters outside using the HDMI Extender. The Automatic Virtual EDID feature allows automatic copying of the Extended Display Identification Data (EDID) to the sender unit for continuous availability to the source.

Feature

1. Supports HDMI1.4, HDCP1.3 and compatibility DVI.
2. Supports video resolutions up to 4Kx2K@30Hz,1080p@120Hz, and 1080p 3D.
3. Supports long distance transmission up to 3300feet/1000meters over single-mode fiber cable and up to 1000 feet/300 meters over multimode fiber cable ( 50/125µm/OM3) .
4. Supports HD audio formats: LPCM2/5.1/7.1 CH, Dolby Digital, DTS, Dolby TrueHD, DTS-HD Master Audio and more.
5. Transfer Bidirectional Infrared control signal together with the HDMI signal.
6. Transfer Bidirectional RS232 control signal together with the HDMI signal.
7. Supports smart EDID management.
8. Locking power supplies.

Specification

1. Maximum Pixel Clock 300 MHz

2. Supports video resolutions up to 4Kx2K@30Hz

3. Transmitter

Input Ports 1x HDMI, 1xIR in, 1xRS232

Output Ports 1xIR out, 1xOptical

4. Receiver

Input Ports 1xIR in, 1xOptical

Output Ports 1x HDMI, 1xIR out, 1xRS232

5. Power Supply DC 5V 1A

6. ESD Protection ± 8kV (air-gap discharge)

Human Body Model ± 4kV (contact discharge)

7. Dimensions (mm) 100(W) X 65 (D) X 25.6 (H)

8. Weight 210g/TX, 210g/RX

9. Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F

10. Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F

11. Relative Humidity 20~90% RH (Non-condensing)

12. Power Consumption (Max) 2.2W/TX, 2W/RX

Unit Layout & Description

Transmitter Front and Rear Panel

1. DC 5V: Plug the 5V DC power supply into the unit.

2. Power:illuminates when power has been supplied to the unit.

3. HDMI In: This slot is where you connect the HDMI source.

4. RS232 TX/RX: Connect to a PC or Laptop with 3-pin Relay cable for the transmission of RS-232 commands.

5. Optical link: illuminates when the Transmitter and Receiver through optical fiber cable connection good.

6. HDMI in: illuminates when HDMI source has been supplied to the unit.

7. Optical out: Connect Receiverwith a single-mode fiber cable or multimode fiber cable.

8. IR TX: Connect with Wideband IR Tx.

9. IR RX: Connect with Wideband IR Rx.

Receiver Front and Rear Panel

1. DC 5V : Plug the 5V DC power supply into the unit.

2. Power : illuminates when power has been supplied to the unit.

3. HDMI out: This slot is where you connect to a HDMI equipped TV/monitor.

4. RS232 TX/RX: Connect to a PC or Laptop with 3-pin Relay cable for the transmission of RS-232 commands.

5 Optical link : illuminates when the Transmitter and Receiver through optical fiber cable well connected. 6. HDMI out : illuminates when HDMI display device has been connected to the unit.

7. Optical in: Connect Transmitterwith a single-mode fiber cable or multimode fiber cable.

8. IR TX: Connect with Wideband IR Tx.

9. IR RX: Connect with Wideband IR Rx.

IR Cable Pin Assignments

Connection Diagram

Bidirectional Infrared control Application Example

Bidirectional RS232 control Application Example

Application Example

Packaging & Shipping

Packaging

1. HDMI Fiber Optical Extender Transmitter ------------------------ 1PC

2. HDMI Fiber Optical Extender Receiver ---------------------------- 1PC