|
| Switching Power Supply 1.Low price and high reliability 2.105 output capacitor 3.AC input power suitable for the world 4.High efficiency and low operation temperature 5.Soft-start current can reduce the AC input impact effectively 6.With short-circuit and overload protection 7.Compact size, light weight 8.100% full-load burning test 9.Installed with EMI filter, minimum wave | Model Specification | S-15-5 | S-15-12 | S-15-24 | DC output voltage | 5V | 12V | 24V | Output voltage error (Note2) | ±2% | ±1% | ±1% | Rated output current | 3A | 1.3A | 0.7A | Output current rage | 0-3A | 0-1.3A | 0-0.7A | Wave and noise(Note3) | 50mVp-p | 50mVp-p | 100mVp-p | Inlet stability(Note4) | ±0.5% | ±0.5% | ±0.5% | Load stability(Note5) | ±1% | ±0.5% | ±0.5% | DC output power | 15W | 15.6W | 16.8W | Efficiency | 65% | 68% | 72% | Adjustable range for DC voltage | ±10,-5% | ±10% | ±10% | AC input voltage range | 85132VAC/170264VACselected by switch | Input current | 0.5A/115V 0.25A/230V | AC impulse current | Cold-start current 15A/115V 30A/230V | Leakage current | <0.5mA/240VAC | Overload protection | 105%150%Typecurrent limiting; Reset: auto recovery | Over-voltage protection | | High-temperature protection | | Temperature coefficient | ±0.02%(050) | Setup rise hold up time | 200ms,100ms,30ms | Vibration | 10500Hz,2G 10min./1cycle,Period for 60min,Each axes | Withstand voltage | Input and output interval1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC | Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure0500VAC/100M Ohms | Working temperature and humidity | -10+60,20%90%RH | Store temperature and humidity | -20+85,10%95RH | Overall dimension | 99*97*35mm | Weight | 0.3Kgs | Safety standards | Meet UL 1012 requirement(Not apply for the mark) | EMC standards | Meet FCC Part 15J Conduction Class B | Note:1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity 2.Error,include the setting error, line stability and load stability.(Note:5) 3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. 5.Load stability test: The load is from 0% to 100%,others 60%. 6.C2311must be knocked down. |
|
|