Specifications

1.Economical models with electrical equipments
2.Output voltage:5V 12V 24V
3.Efficency>70%
4.Output current:1-2A

1. Features 

1.Low price and high reliability 

2.105 output capacitor
3.AC input power suitable for the world
4.High efficiency and low operation temperature
5.Soft-start current can reduce the AC input impact effectively
6.With short-circuit and overload protection 
7.Compact size, light weight
8.100% full-load burning test
9.Installed with EMI filter, minimum wave

2. Specification

 

Model / Specification	S-10-5	S-10-12	S-10-24
DC output voltage	5V	12V	24V
Output voltage error (Note2)	±2%	±1%	±1%
Rated output current	2A	0.8A	0.4A
Output current rage	0-2A	0-0.8A	0-0.4A
Wave and noise(Note3)	50mV	50mV	100mV
Inlet stability(Note4)	±0.5%	±0.5%	±0.5%
Load stability(Note5)	±1%	±0.5%	±0.5%
DC output power	10W	10W	10W
Efficiency	65%	68%	72%
Adjustable range for DC voltage	±10,-5%	±10%	±10%
AC input voltage range	85~264VAC 47~63Hz
Input current	0.5A/115V 0.25A/230V
AC impulse current	Cold-start current 15A/115V 30A/230V
Leakage current	<0.5mA/240VAC
Overload protection	105%~150%Type: current limiting ;Reset: auto recovery
Over-voltage protection	……
High-temperature protection	……
Temperature coefficient	±0.02%°C(0~50°C)
Setup rise hold up time	200ms,100ms,30ms
Vibration	10~500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage	Input and output interval:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
Isolation resistance	Input and output interval,Input and enclosure,Output and enclosure:0500VAC/100M Ohms
Working temperature and humidity	-10°C~+60°C,20%~90%RH
Store temperature and humidity	-20°C~+85°C,10%~95RH
Overall dimension	69*75*28mm
Weight	0.12Kgs
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25°C 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note:5)
3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test:The load is from 0% to 100%,others 60%.