Specifications

1.Made from alumina or steatite
2.Fine electrical performance
3.Resis high temperature
4.Anti-chemical
5.Can be custom made

 

2.The ceramics have no cracks,no burrs,no pinholes,no gaps,and no impurities, surface is smooth, dye absorption is passed.

3.Linear dimension tolerance ≤ ± 0.05mm, diameter tolerance ≤ ± 0.1mm, hole size distortion ≤ 0.05mm, circumference deformation size ≤ 0.1mm.

4.Insulation Resistance ≥ 100MΩ (have been checked by megohm in DC500V).

5.Dielectric Strength: AC2000V/50HZ/1min no breakdown phenomenon.

6.Linear expansion coefficient is slight,and less than 7.0 × 10-6mm /°C, and good for thermal shock performance.

7.Sintering temperature is 1350 °C, the use of a temperature not lower than 1100 °C, good corrosion resistance.

 

Application:

Widely used as holder of lamp.

 

Brife description for typical ceramic end cap/end fitting/ holder of lamp

 

Manufacturing processings flow chart and factory tour

 

 

 

 

 Regular shipping methods

1.Intl' express; 2. Air freight; 3. Sea freight