Ceramic end cap 

1.Ceramic end cap for lamp is made from alumina or steatite.

2.We manufacture these ceramic end fitting through ceramic end fitting through hot pressing and dry pressing.

3.Standard type or customize type are available to us. 

4.Surface finish: External surface with glazed

5.The ceramic end caps have no cracks, no burrs, no pin holes, no impurites. Surface is smooth.

6.Good insulation and electrical performance, insulation resistance ≥100MΩ (have been checked by megohm in DC500V); Dielectric Strength: AC2000V/50HZ/1min no breakdown phenomenon and low linear expansion coefficient is slight,and less than 7.0 × 10-6mm /°C, and good for thermal shock performance.

7.They are widely used in various of UV lamp.

Brife introduction for typical ceramic end cap/ end fitting/ holder/base for lamp

Overall manufacturing processings & factory tour

 1. Polybag with air bubble as inner package; 2. full of protective PE foam inside of outer carton; 3. Export carton as outer package, refer to below file:

   As a good reputation manufacturer for various of fine ceramic components, our main product categories is : metallized ceramic insulators, ceramic burrs for pepper/salt and coffee grinder, ceramic fuse body and thermostate ceramic parts and so on.

 -Factory location: Hunan province, P.R.China

- Factory scale: 5000 m2,  130 people

- Factory certificate: ISO9001: 2008, RoHS, FDA

- Exported area: Europe, South American, Aisa,African, over than 50 countries

Why do our customers choose us?

-Professional service

-Quick response in 24 hours for any enquiry or doubt

-Good credit, Promise is promise

-Stable teammate

-Prototype to mass production available

-Competitive price & technology advantage

I do believe what if you can offer your valuable to us, you will believe it will be a right choice. You will satisfy with your choice. We are looking forward to working with you together.

 1.Standard type and custom made available, or not?

Yes, we can provide this kind of service to our customer. We have our own tooling for standard end caps, aslo we can produce various of ceramic end fitting according to customers' specification, drawing or samples.

2.What is the lead time for ceramic end caps?

In common case, the regular lead time for new samples is 4~5 weeks; Once the samples qualified, the lead time is within 4 weeks after receipt of formal order. But the order quantity is a key factory to influence the lead time.

3.Does this raw material meet RoHS, REACH?

Yes, whatever alumina , steatite C221 or zirconia ceramic material are comply with RoHS, REACH appliance.