Product Details

Equipo pvd-recubrimiento multi-arco

PVD coatings provide a number of benefits to metal parts in addition to hardness and adhesion.
The most significant are as follows:
- Improved wear resistance
- Reduced friction
- Biocompatability
- Chemical barrier
- Decorative colors and aesthetic
PVD coatings such as TiN, ZrN, CrN, DLC has been deposited onto titanium and titanium alloy surface are some of the surface treatment methods that are been both research and commercially adapted to improve corrosion resistance in both highly acidic and basic environment. In the recent academic research, Niobium/Niobium-Titanium based nitride coating deposition on titanium for corrosion protection of dental implants has shown to be a promising technique.
The protective property increases as varying parameters of the Argon plasma during conventional sputtering deposition which in turn improves intermediate bonding layers and the coating structural interfaces. However this method compromised deposition rate which is an essential design criteria within a commercial setting. Arc Deposition on the other hand as the research shown is capable of much higher deposition rate in addition to the favorable deposition.

Our Services

Before sales:

Our engineers are ready to provide custom made design and recommendation for each customer's case.
We provide professional consulting service for PVD coaters and lines.
We also have set up good relations with the suppliers of relative consumables and parts for your needs.

After-sales

We will send the engineers to your place for installation, fine tune and for operation training.
We will provide troubleshooting service all lifetime.
The warranty period of the machine is 1 year.
We will contact you to ask for about the conditions of the machine in periodically.
We also provide the service for further extension on your existing machine.

FAQ

Question 1: I am going to set up a new factory. I don't know anything about the machine. Will you provide the technical support?

Answer: Sure. Every machine will be test before delivery. We will make sure there is no problem for the machine.

You may send 2-3 smart workers to come to our factory to learn how to operate the machine.

When the machine arrives your factory, we will send the experts to your factory to help for installation. Operation training will be provide. It may take about 20-30 days. Maintenance tips will be given.

Also, we provide consulting service for creating the proper facilities for running the machine.

Question 2: What is price of the machine?

Answer:

The machine is custom made. If you have any drawing or any information on specification of the machine, please send to us for quote.

If you are totally new in this area, please tell us the max. dimension of your products, its application, and your desired daily capacity.

We will provide our professional suggestions and work out an appropriate design for your project.

Question 3: What kind of pre-treatment I need to do before the vacuum PVD process?

Answer: In vacuum area, the products(we call it"substrate") have to be CLEAN, DRY AND SMOOTH. So we will need washer and dryer, sometimes base varnish, and topcoat to protect the coatings.

Question 4: Do I have to pay the costs for pollution?

Answer: The machine is environment-friendly, there is no liquid chemical waste and harmful gas. This is a kind of green technology.

Inquiry Guides

Dear Customer: :-)

Good day.

When you are going to send us a inquiry, in order to design the most appropriate machine for your project, please answer the following questions in your letter:

1. What is your product, its material and application

2. What is the possible max. dimension of your product

3. What is your desired productivity per 8 hours/shift.

The answers to the above question will help us a lot on designing or do the recommendation.

Please send the inquiry at the bottom of this page.

*******************************************************************************************************************************

Everything you need to prepare for running the PVD coating machine ESPECIALLY FOR FOR NEW USERS (Please check the specifcations of the involved machines with us)
Sort of machines	Vacuum Metallising Machine	Magnetron Sputtering Machine	Arc Deposition Machine
General needs	Cooling Water for the diffusion pump (Least): Chiller	Cooling Water for the diffusion pump, sputtering cathodes (More):Chiller	Cooling Water for the diffusion pump, arc cathodes, the vacuum chamber (Most):Chiller
	Compressor for the mecahnical pump	Compressor for the mecahnical pump	Compressor for the mecahnical pump
	Electricity Power (Ranges 50-120kW)	Electricity Power (Ranges 50-1500kW)	Electricity Power (Ranges 50-400kW)
Footprint	Please check with us for different designs	Please check with us for different designs	Please check with us for different designs
Materials for the process (Material)	Aluminum filament Tungsten filament	Target material: Titanium, Stainless steel, Chrome, Silver, Copper, Aluminum, ITO, etc	Target material: Titanium, TiAl, AlTi, Chrome, etc
Materials for the process (Gas)	-	Agron Oxygen, Acetylene, Nitrogen, etc (All the tanks for the gases need pressure reducing valves and gas pipes, connectors)	Agron Oxygen, Acetylene, Nitrogen, etc (All the tanks for the gases need pressure reducing valves and gas pipes, connectors)
Operators	1-2	1-6(can be batch type & continuous type)	1-2
Oils	Diffusion pump oil & mechanical pump oil	Diffusion pump oil & mechanical pump oil	Diffusion pump oil & mechanical pump oil
Pretreament machines for the substrates	a. Base varnish & topcoat painting&equipment(UV painting) b. Cleaning & dry	a. Base varnish & topcoat painting&equipment(UV painting) b. Cleaning & dry	a. Ultrasonic Washing Machine b. Polishing Machine(if necessary) c. Oven d. Pure water machine
Other items	Mentioned in the spare parts list	Mentioned in the spare parts list	Mentioned in the spare parts list