Product Details

CW61100B/125B/160B parallel lathes are suitable for turning of cast iron and steel workpieces,turning of non-ferrous metal parts of big or medium sizes.It can do external cylindrical surface turning,inner hole and end face turning,groove broaching,drilling,boring and trepanning.It can also turn various intemal and external metric,inch module and diametrical pitch threads,the top slide can be used independently for turning of short taper.
These lathes are of high power,high rigidity and wide rotating speed range,so it can be used for high speed and strong force turning.

Main technical specification
Capacities			CW61100B	CW61125B	CW61160B
Swing over bed		mm	1000	1250	1640
Swing over carriage		mm	615	865	1250
Maximum length of workpiece		mm	500 1500 3000 5000 6000 8000 10000 12000
Maximum turning length		mm	480 1300 2800 4800 5800 7800 9800 11800
Width of guideway		mm	755
Spindle
Spindle nose code		mm	A2158×M22
Diameter of spindle thru hole		mm	130
Taper hole of spindle			140
Number of forward turning speeds			21
Number of reverse turning speeds			12
Spindle speed	Forward	r/min	3.15315
	Reverse	r/min	3.5291
Feed motion
Number of feeds per revolution longitudinal/transverse			56/56
Feed per revolution	longitudinal	mm	0.112(0.004"0.473")
	transverse	mm	0.056(0.002"0.236")
	upper tool-post	mm	0.0253(0.001"0.118")
Number and range of metric thread			44;1120mm
Number and range of inch thread			31;281/4
Number and range of module thread			45;0.560mm
Number and range of diametrical pitch thread			38;1/256DP
Tool post
Distance between spindle center-line and tool resting plane		mm	48
Size of tool shank		mm	45
Tool post swing range		°	±90°
Max.travel of carriage		mm	450 1450 2950 4950 5950 7950 9950 11950
Max.travel of top slide		mm	300
Max.travel of cross slide		mm	520(20")	580(22")	630(24")
Tool post travel per turn of the dials of top or cross slide		mm	0.05(0.002")
rapid travel speed	longitudinal	mm/min	3740
	transverse	mm/min	1870
	top slide	mm/min	935
Tailstock
Diameter of Tailstock quill		mm	160(6")
Travel of tailstock quill		mm	300(12")
Taper hole of tailstock quill			Morse 6#
Lub and operating pump
Type			CB-B10
Flux		L/mim	10
Working pressure		kg/cm	25
Speed		r/min	1450
Machine overall dimension
Hight		mm	1700	1825	2150
Width		mm	2150
Max.weight of workpiece
Max.weight of workpiece		kg	5000