Product Details

High Qualiyt Thermacol /EPS Wire Mesh 3D Panel Machine

Specifications of Wire Mesh 3D Panel Machine:

The complete equipment is controlled by PLC, made up of fixed steel wire frame and EPS board, manually load the board, wire frame loaded integrately and automatic unload the finished product. The oblique wire is guided by steel tube, automatic cut with position limit switch controlling the cutting lenth. The Hydraulic Power Transmission System is used for easier working position adjustment and the quto feedback system is also adopted in the electrical control system for fualt alarm and faster solution.

Main Parameters(Standard) of 3D Panel Machine:

Board Dimension and accepted tolerance
Length	2.4~3m	Thickness	70~200mm
Width	1.22m	Diagonal Length Error	≤10mm

Overall Dimension
LengthWidthHigh	16m6m1.8m
Weight	About 4500KG

Welding Index
Welding Strength	≥450N
Welding Shortage	≤5%

Power Information
Connecting Power	≤60KWA
Voitage	380V
Rate	50HZ

Material Performance Index

Steel Wire Diameter:2~3mmm, Low Carbon, Zn-Plated, Cold Drawing Wire; Tensile Strength:70~850N/mm2

EPS Volume Weight≥16KG/m3, Flame retardant, Oxygen Index≥30

Product Property of Wire Mesh 3D Panel Machine:

1.Light in weight: its weight only 4kg/m2, and no more than 110kg/m2 ever after coated with cement on both side.

2.Large load-bearing capacity: a plate of 2.4m in height 1.22m in width, 110mm in thickness with cement coating, can bear axially over 74.4KN/m2, and horizontally over 1.95KN/M2.

3.Heat insulation and warmth-keeping: heat-resistance as high as 0.64m2.K/W, equaling that of a brick wall of 800mm thick.

4.Sound insulation: insulate as much as 45db noise.

5.Enhanceing the useful area: its thickness can be about 110mm with the cement coating, which can enhance the 10~13% of the useful area.

6.Easy to install and splice: as designed, the plate can be spliced into any flat shape, folding shape and curving shape: and it is easy to lay apparatus of electricity , water, and gas inside the spliced structure. Its building efficiency can be as high as 24~28m2 per day per worker.

Thickness of EPS	Heat Conductivity	Heat Resistance	Be Wall Thickness
25mm	0.042W/MK	0.5m2.K/W	404mm
30mm	0.042W/MK	0.6m2.K/W	485mm
40mm	0.042W/MK	0.8m2.K/W	647mm
50mm	0.042W/MK	1.0m2.K/W	808mm
60mm	0.042W/MK	1.2m2.K/W	970mm

3D Board, One kind of the series of steel frame sandwich board, is made of steel frame and eps foaming board. Single ordouble layers eps board can be assemblied in the steel frame.