EPS vacuum Block Moulding Machine/Polystyrene / Styrofoam Block Machine

Product Description: EPS Block Moulding Machine    

1. EPS Air Cooling Block Moulding Machine adopts PLC
2. Touch screen
3. Automatic mould opening
4. Mould closing
EPS Air Cooling Block Moulding Machine

 Specifications: Eps Block Moulding Machine

1. The machine adopts PLC and touch screen for automatic mould opening, mould closing, material feeding, steaming, temperature keeping, air cooling, de-moulding and ejecting;
2. The machine sets up high-pressure blower for suction the material; Adopts penetration of theory forming and the cycle of comvection cooling, low moisture content.

Main technical Parameters:   Eps Block Moulding Machine

Specification	Unit	AC/D2000	AC/D3000	AC/D4000	AC/D6000	AC/D8000
Mould chamber internal size	mm	2000*1200*600	3000*1200*600	4000*1200*600	6000*1200*600	8000*1200*600
Product density	Kg/m 3	6-40	6-40	6-40	6-40	6-40
Product efficiency	Piece/h	3-20	3-20	3-20	3-20	3-20
Compressed air pressure	Mpa	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Steam pressure	Mpa	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Power supply voltage	V/Hz	380/50	380/50	380/50	380/50	380/50
Power	kw	8	8	10	13	18
Contour size	mm	4000*3000*2800	5000*3000*2800	6000*3000*2800	8000*3000*2800	10000*3000*2800
Installed weight	kg	4500	5500	6500	9500	10500

 

Pictures of   Eps vacuum Block Moulding Machine

  Raw materials:  Eps Block Moulding Machine

 

  Applications:  Eps Block Moulding Machine

 

FAQ: eps block moulding machine     

1.An axial dislocation episodes
    Approach: attack as promised condition, loosen the adjustment bolt is mortal, after adjustment tighten.
2.Suction infarction
    Approach: In this situation, only the suction mouth open and make cleaning tasks, so you can clean the 

    suction mouth stick.
3.Sealing convergence at the pad form deformation, and then hit on the hydraulic
    Approach: just change these issues a new gasket can be.