Main tech data

Platinum thermal resistance accuracy: class B

Graduation: Pt100. (The resistance value in 0℃) R=100~0.12ohm(B)

Allowable deviation delt t(℃): ±(0.30+0.005t)(B)

Input: thermocouple: K, E;       Thermal resistor: Ptl00

Output: It is linear with electric signal of thermal resistor or millivolt signal of thermocouple within DC 4~20mA signal , linear with temperature of thermal resistance or thermocouple.

Note: The output and input of isolated temp transmitter is isolated, the isolated voltage is 0.5kv. Basic error: compute formulas delt=delt 1+delt 2,

delt 1 is allowed deviation of thermocouple

delt 2 is basic error of transmitter ±0.5%FS

Transmission mode: two wire system.

Working voltage: Lowest 12V, highest 35V, and rated 24V

Load: Limit load calculation as follows,

R1(max)=50×(Vmin-12)

(The load resistance can be selected from 0~600 ohm in 24V, and the rated load is 250 ohm)

a. Ambient temp: -25℃~80℃ (not higher than 70℃ in dangerous place)

b. Relative humidity: 5%~95%

c. Mechanical vibration: f≤55Hz, swing<0.5mm

d. No corrosive medium around

Explosion proof class

(Explosion proof type):dIIBT4        dIIBT6      or     dIICT4       dIICT6

(Intrinsic safe):ibII BT4, ia IIBT4,iaIICT6(multiple)

Models of related equipment are MTL728,Z928,L8928.

Housing: IP65

Model

SBW Series explosion-proof intrinsic safe transmitter with thermocouple or RTD is field mounting type instrument. It combines the thermocouple (resistance) with the transmitter as a whole, directly measures the temp of vapor, gas and liquid in a variety of industrial temperature from -200 to 800℃, and converts the temperature signal into 4~20mA DC unified output signal which is in direct proportion with the thermocouple/thermal resistor temperature or the output electric signal, and then send it to display meter, recorder, adjusting meter or computer.

Flameproof, intrinsically safe thermocouple (resistance) temperature transmitter is designed and  manufactured  according  to  the  "  explosion-proof  electrical  equipment  in  explosive environment " (GB3836) standard regulated by the state, and the thermoelectricity performance is in  line  with  international  IEC  standard,  tested  and  approved  by  the  national  instrument explosion-proof safety Supervision Station, is an ideal integrated temperature transmitting product for explosive environment, and applicable for dangerous environment where there is flammable gas or liquid vapor.