Specifications:

Basic functions

Temperature / Humidity

℃ /“F temperature switch display

The maximum / minimum temperature and humidity memory function

12/24 hour clock

The whole point timekeeping function

Daily alarm

Calendar display

How-to

1.Pushed by the rear direction of the battery door, battery, and then replace the

Battery door, the machine can be used.

2.Key features:[MODE]switch the clock and alarm display mode/set the current

clock, alarm clock, 12 or 24 hour clock, date;[ADJ]adjust the value is set to the

project;[MEMORY]display memory in the highest & lowest temperature and

humidity value/clear memory of the maximum & minimum temperature and humidity

values;[℃ /“F switching temperature units]℃(degrees Celsius)or“F(F)

display;[RESET]clear all settings & memory value, return to the initial state.

3.In the initial state, press[MODE]2 seconds, minutes and seconds the current

Time the number of start flashing, press[ADJ]few minutes and seconds can be

Adjusted continuously press[MODE]were set to “Clock”,”12/24”,”month(M)”,

“Day (D)”.

4. In the current clock mode(clock and minutes flash time between the two points

Per second), press [MODE]once, switch the display for the alarm clock mode

(clock and minutes between two points in not flashing),then press[ADJ]to

Switch “alarm”(Alarm) function/“The whole point of time”()function switch, and

Then press[MODE]2 seconds, you can set the alarm time, and start the“whole

point of time”function, ()symbol appears.

5. In alarm mode, without any operation automatically after one minute then return

to the current clock, then press to switch to the[ADJ]calendar display, 3 seconds

automatic ally returns the current clock, pressbutton to display the

temperature/humidity Last a clear(CLEAR) since the maxim um/minimum.

6.[MEMORY]can be displayed by the memory of temperature/humidity

Maximum(MAX)and minimum(MIN), press and hold[MEMORY]more than

7. In the bracket ℃ and ℉ conversion key

2 seconds to clear the maximum/minimum.

Notes

1.First use & replace the battery when you press[RESET](back in the machine);

2.If there any bad machine,please press[RESET];

3.Please replace the battery after use government-design ated locations.