JYS Oar Dryer

1. The principle of work

This product can to cream, granular, powder, plasma shape material indirect heating or cooling, can complete drying, cooling, heating, sterilization, reaction, low temperature burning and other unit operations. Equipment of the special wedge-shaped mixing blades heat transfer, it is of high heat transfer efficiency and the heat transfer surface cleaning function.

Hollow shaft dense array the wedge-shaped hollow blades, hot medium flows through the hollow shaft blades. The unit effective volume heat transfer area is very large, hot medium temperature from 40 °C to 320 °C-can is water vapor, also can be liquid type: such as hot water, heat conduction oil etc. Indirect transmission heating, not carrying air take away heat, heat are used for heating material. Heat loss is only through the device to the environment of the insulation layer body heat. Wedge type heat transfer surface since the blades with clean function. Materials particles and wedge-shaped the relative motion produces washing function, can wash off wedge-shaped face attached material, make the operation has been kept clean heat transfer surface. The blade dryer for the shell and Omega; Type, the internal general arrangement two to four pillars of stirring shaft of hollow. Shell sealed cover and the bonnet and prevent material leaked out and give full play to the role of dust. Heat transfer media through the rotary joints and flows through shell clip set of stirring shaft and hollow, stirring shaft of hot medium hollow according to the type of different internal structure, to ensure best of the heat transfer effect.

2. Product features

(1) the blade dryer low energy consumption: because of indirect heating, no large take air take away heat, dryer and set the outer wall insulation layer, pulp to shape material, evaporation 1 kg only 1.2 kg water vapour.

(2) the cost of the blade dryer is low: the unit effective volume has great heat transfer surface, so the processing time is shortened, and the size of the equipment becomes small. Will greatly reduce the building area and building space.

(3) processing materials range: with different heating medium, can deal with heat sensitive material and to be processed under high temperature of the material. The normal media are: steam, heat conduction oil, hot water, cooling water, etc. It might be continuous operation or batch operation, widely used in many areas.

(4) the environment pollution small: not carrying air, very few powder. The solvent evaporation capacity is very small, easy to deal with. There is pollution to the material or the solvent to be recovered condition, can use closed-circuit circulation. < BR >

(5) lower operation cost: the equipment is normal operation, only 1 hours/day & middot; People. Low stirring speed and reasonable structure. Wear is small, and the maintenance fee is low.

(6) stable operation: as the wedge-shaped blades special compression-inflation mixing effect, make the material and heat transfer surface with full grain, in the axial interval, material of temperature, humidity, mixing degree gradient is small, so as to ensure the stability of the process.

3. Application example

(1) the city industry sludge, sludge drying processing, making life carbon ball, the carbon rods. (example photos)

(2) industrial waste residue dry processing.

4. Technical parameters

Type JYS-10 JYS-16 JYS-24 JYS-32 JYS-60 JYS-100

Heating area 10 16 and 32 60 100

Evaporation capacity 65 96 158 250 400 40

Speed 2.5-25 RMP

Turn power 5.5 7.5 7.5 11 and 15