Specifications

With rotating straightener and high-speed hydraulic cutter for straightening and cutting rebars.

With rotating straightener and high-speed hydraulic cutter for straightening and cutting smooth and ribbed, hot and rolled structural wires.
Technical characteristics:
Pulling speed is adjustable (two speed or steplessly adjustable, depend on the model), Max. pulling speed120mm/min.
The wire length to be cut is manually set and measured using a release device in the extension.
High-speed hydraulic cutting system. In the cutting mod, the advice wheels are relieved from pressure.
Operating console with programmer, display and piece counter. After run-down of the pre-programmed rod piece numbers, the machine is automatically brought to a standstill.
Safety switch-off device.

Technical data	GT 12	GT 12A	GT 14
Wire diameter	5~12mm	5~12mm	8~14mm
Cutting length	800~12000mm	800~12000mm	800~12000mm
Pulling speed	80, 120m/min	0~120m/min	0~180m/min
Accuracy of cutting length	±3mm	±3mm	±3mm
Capacity of pay-off	~2 T	~2 T	~3 T
Rated power	27.5kw	27.5kw	55kw
Machine size (l×w×h)	~20×1.5×1.5m	~20×1.5×1.5m	~25×2×1.7m
Total weight	~4T	~4T	~7T

The technical data specified below refer to standard welding lines which, however, can be adapted to our customersspecific requirements.