Wholesale Full automatic 360 degree professional automatic electrical industrial home grilled sausage machine for sell YXD-7
USD $68 - $75 /Piece
Min.Order:5 Pieces
Nanchang Huatuo Industrial Co., Ltd.
Full automatic 360 degree automatic electrical industrial grilled sausage machine for sell YXD-7
High quality machinery equipment automatic vending machine with coffee grinder
High quality grinder plastic recycling machine automatic small kitchen machine
High quality automatic terminal manure grinder machine automatic small kitchen machine
High quality automatic terminal brazing machine automatic small kitchen machine
Wholesale Full automatic 360 degree professional automatic electrical industrial home grilled sausage machine for sell YXD-7
Full automatic 360°sausage machine is automatic temperature control and spins in 360°. When roasted, the sausage will show bright fragrance witha best flavor because of the even heating and controllable temperature. This machine is easy to handle and quite to revolve. High efficiency, clean hygiene and nice look are another features of it, which is suitable for every kind of places.
Main technical parameter sheet
Type | Type YXD-5 grilled sausage machine | Type YXD-7 grilled sausage machine | Type YXD-10 grilled sausage machine |
Number of roller | 5 | 7 | 10 |
Rated input power | 0.8kw | 1kw | 1.2kw |
Width of roller | 450mm | 450mm | 450mm |
Power supply | 220V 50Hz | 220V 50Hz | 220V 50Hz |
External size | 400*480*500 | 400*580*500 | 400*680*500 |
Net weight | 22kg | 25kg | 30kg |
Surface map of the machine
Instruction and ways of cleaning the machine
1. Set the heating button to "0". Use wet cloth to cover the surface of roller and begin to clean after the adhering things are softened in the condition that temperature is naturally cooled and scrolled button is not closed.
2. Use soft cloth which is adequate wet to wipe every roller until they are totally clean. The direction of wiping should be from the bottom of the roller to the center so that the adhering things can drop from roller in case they fall into the bearing and cause accident.
3. After wiping the roller, close power supply, pull off plug and take out chassis. Use hot soap water or detergent to wipe and rinse it by water. Then put it into chassis.
4. Use warm, soft cloth to wipe other parts of the machine until it is totally clean.
5. If there is stubborn stains, use metal ball to wipe them by hot soap water or detergent.
6. Lay the machine in the place where there is good ventilation and no direct sunshine or ash.
Please feel free to contact me at 0086 18270806691(Mark)