IRON OXIDE GRAY PRIMER SPRAY PAINT FOR CASTING IRON
USD $30 - $48 /Barrel
Min.Order:2 Barrels
IRON OXIDE GRAY PRIMER SPRAY PAINT FOR CASTING IRON
GRAY OXIDE PRIMER | ||
TYPE | Antirust paint based on alkyd resins with red oxide pigments. | |
USES | Antirust under coat for steel. | |
CHARACTERISTICS | 1. Very fast drying. 2. Good adhesion. 3. Excellent resistance to water and weathering. 4. Reality low cost. | |
GLOSS | Flat | |
COLOR | Gray | |
WEIGHT | Above 1.3 kg/L | |
VISCOSITY (25 °C) | 90 - 100 KU | |
DRYING TIME (25 °C) | Set-to-touch Dry hard | 0.5 hrs. 2 hrs. |
OPTIMUM FILM THICKNESS | Wet Dry | 90μ(microns) 40μ(microns) |
OVERCOATING INTERVALS (25°C) | Min. 6 hrs. | |
NON-VOLATILE CONTENT | Above 65% | |
THINNER | Toluene | |
THINNING RATE | 70~%(depends on tools used) | |
APPLICATION METHOD | Airless Spray, Brush, Roller. | |
NOTE | 1. Moisture, grease, rust, dirt and loose paints film on substrate must be removed. As a result, paint performance can be ensured. 2. Before application, stir paint evenly. When paint is too thick, thinner can be added within specified quantity 3. Application should avoid the following environment: rainy day; substrate is damp by dew; temperature is above 40°C or below 10°C. 4. Subsequent coat has to wait until paint films of preceding coat completely dry off. |