Name: Hobbywing Seaking Pro 160A ESC Waterproof Brushless Speed Controller for RC Boat
Brand: Hobbywing
Availability: InStock

Product Details

Hobbywing Seaking Pro 160A ESC Waterproof Brushless Speed Controller for RC Boat

Product Description:

Competition Design

The light-weight of the Pro 160A is designed to meet the users requirement of a light weight product

for all marine competition which weight is a factor of speed and endurance. The core program

for top-level competition products guarantees the user first-class control and “abundant”

programmable parameter items for different competition environments.

High Voltage Built-in BEC

The built-in switch mode BEC with a maximum output of 8Amp and switchable
voltage of 6V/7.4v make this ESC compatible with high voltage servo.

Innovative Turbo Function

The world’s first marine ESC to have implemented the turbo timing function which will
give the user the edge over the competition with instant turbo boost.

Waterproof Design

100% waterproof without the need of extra protection.

Reliability and performance

Built with the highest quality components (eg. MOSFET’s with extremely low internal resistance)
and coupled with cutting-edge firmware, the Pro 160A is featured by enhanced current rating
and reliability. Multiple safety adjustable options are in use, with the implementation of the
low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling system

The Hobbywing patented heat-conductive copper bar cover on the power board of the Pro 160A

can efficiently and effectively transfer the internal heat to the integrated CNC machined billet

aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Firmware Upgradeable

The Seaking Pro 160A ESC’s firmware is upgradable via the HOBBYWING USB LINK

software which can be downloaded from HOBBYWING’s website

(The multifunction LCD program box and a PC are needed for the firmware upgrade).

Specification:

Type	Brushed/Brushless	Brushless
Type	Waterproof	WP
Specifications	Cont./Peak Current	160A/1050A
	Input	2-6S LiPo/6-18 Cells NiMH
	BEC Output	Switch Mode:6V/7.4V,4A
Size & Weight	Size	108.5x51.5x14.4mm
	Weight	127g
	I.D./O.D. of the Water Cooling Pipe	Φ3.0/5.5 mm
Wires & Connectors	Input Wires	Red-12AWG-200mm1 Black-12AWG-200mm1
	Output Wires	Black-12AWG-150mm*3
	Input Connectors	No
	Output Connectors	No
	(Note: All the wire length above is the original length not the length you see from the outside.)
ESC Programming via	Transmitter	Supported
	LED Program Box	Not Supported
	LCD Program Box	Supported
	WiFi Module	Supported
	Program Port	Separate Program Wire
Firmware	Firmware Upgrade	Supported
Applications	Mono2 /Other Competition Boats (≤120cm)

Installation & Connection

1. Water Cooling Tube Connecting(Silicon tube needs to be provided by users.)
The aluminum water cooling tube (outer diameter = 5.5mm) has been pre-mounted on the ESC heatsink at factory.

Please connect the silicon tube to the aluminum water cooling tube.
2. Motor Wiring
There is no polarity on the A/B/C wires between ESC and motor, so do not worry about how you connect them initially.

You may find it necessary to swap two wires if the motor runs in reverse.
3. Receiver Wiring
1) How to connect the throttle control cable
Plug the throttle control cable (also called Rx cable) on the ESC into the throttle (TH) channel on receiver.

The RED wire in the throttle control cable will output the BEC voltage of 6V/7.4V to the receiver and servo,

so please do not connect any additional battery to the receiver.
2) How to connect the Turbo Acceleration signal wire (/single YELLOW wire)
Plug the Turbo Acceleration signal wire of the ESC into any unoccupied channel (for example, CH3/CH4) on your receiver.
4. Battery Wiring
Proper polarity is essential here! Make absolutely sure positive (+) of ESC connects to positive (+) of battery,

and negative (-) of ESC connects to negative (-) of battery when you plug in your battery!

If reverse polarity is applied to your ESC from the battery, it will damage your ESC.

This will NOT be covered under warranty!

Packaging: