Name: Hobbywing Seaking 180A V3 ESC 3-6S LiPo 9-18 Cells NiMH Waterproof Brushless Speed Controller for Boat
Brand: Hobbywing
Availability: InStock

Product Details

Hobbywing Seaking 180A V3 ESC 3-6S LiPo 9-18 Cells NiMH Waterproof Brushless Speed Controller for Boat

Product Description:

	Performance & Reliability Built with high-quality components and coupled with cutting-edge firmware, the Seaking 180A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.
	Efficient Cooling System The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 180A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.
	Waterproof Design 100% waterproof without the need of extra protection.
	Built-in BEC The built-in switch mode BEC with output of 5Amp and voltage of 6V make this ESC compatible with high voltage servo.
	Special Algorithm Design The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.
	Separate PRG/FAN Port The separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming.

Specification:

Type	Brushed/Brushless	Brushless
Type	Waterproof	WP
Specifications	Cont./Peak Current	180A/1080A
	Input	3-6S LiPo 9-18 Cells NiMH
	BEC Output	Switch Mode:6V/5A
Size & Weight	Size	72.0x48.0x36.6mm
	Weight	207g
	I.D./O.D. of the Water Cooling Pipe	Φ3.0/5.4 mm
Wires & Connectors	Input Wires	Red-10AWG-200mm1 Black-10AWG-200mm1
	Output Wires	Black-10AWG-150mm*3
	Input Connectors	No
	Output Connectors	No
	(Note: All the wire length above is the original length not the length you see from the outside.)
ESC Programming via	Transmitter	Supported
	LED Program Box	Supported
	LCD Program Box	Not Supported
	WiFi Module	Not Supported
	Program Port	Separate Program Port
Firmware	Firmware Upgrade	Not Supported
Applications	Boat Length <130cm

Installation & Connection

Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.)

For safety, please always keep the propeller away from human body or any other objects.Red color input wire is positive pole, Black color input wire is negative pole.

1) Picture 1 is for Seaking-30A-V3, Seaking-60A-V3 and other ESCs that work with one LiPo battery pack; that is a wiring diagram with 1 battery pack.
2) Picture 2 is for Seaking-120A-V3, Seaking-180A-V3, Seaking-130A-HV-V3(without switch) and other ESCs that may work with two LiPo battery packs; that is the wiring diagram with 2 battery packs.