Low cost Mobile phone signal booster for GSM900,Signal Booster,mobile phone signal repeater(ST-900A)
USD $45.38 - $45.39 /Piece
Min.Order:1 Piece
Skyline (Shenzhen) Technology Co., Ltd.
Low cost cell phone signal booster for GSM900,Signal Booster,mobile phone signal repeater(ST-900A)
GSM Signal booster for 900MHz Mini-type gsm signal amplifier
GSM Signal booster for 900MHz Mini-type gsm signal amplifier use for cell phone signal booster
outdoor booster, umts gsm repeater for 900MHz cellular gsm repeater
outdoor booster, umts gsm repeater for 900MHz cellular gsm 900 repeater
GSM signal Booster for repeat the mobile phone signal,Signal Amplifier,2500Sqm(ST-GSM990)
Low cost Mobile phone signal booster for GSM900,Signal Booster,mobile phone signal repeater(ST-900A)
GSM signal Amlifier for GSM900,Signal Booseter,mobile phone signal repeater(ST-900A) This GSM 900MHz mobile phone signal amplifier significantly improves the performance of any cellular device experiencing weak signal inside of buildings! It provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. it can help reduce drop calls and improve GSM voice communication quality. Using a large external antenna and an indoor repeater, this GSM signal booster boosts signals sent by both your phone and the cell tower.
Features
-High gain, easy installation and operation;
-Full-duplex, single-port design, build-in power supply;
-Use ALC technology, adjust extent automatically;
-LED light working and signal condition indicators;
-Big linear power, control intermodulation and scatteration stably;
-Working Temperature: -10 Degree Celsius to +60 Degree Celsius;
-Humidity: 5% -95;
-CE and RoHs Approved;
Advantage
-low cost
-easy to install
-convenient to use
-adjustable the gain(OEM)
-large coverage
Specification
Working system | GSM | |
Frequency range | Up link:890~915MHz Downlink: 935~960MHz | |
Gain | Modle | ST-900A |
Up link | 50dB | |
Down link | 55dB | |
Export power | Up link | 10dBm |
Down link | 10dBm | |
Pass band ripple | ≤1.8DB | |
I/O impedence | 50Ω/N connector | |
Noise figur | ≤6dB | |
Transmission delay | ≤0.5μs | |
Ambient temperature | -15°C~55°C | |
Power supply | AC/220V±10% 45~55Hz DC,12V | |
Size | 134mm×95mm×28mm | |
Reliability | To the GB6993-86 standard | |
Electromagnetic compatibility | To the ETS300 694-4 standard | |
Function | a) Power supply LED denote b) Export power ELD denote | |
Coverage area | 200 Sqm |
System Installation
Your system should come with at least the following items:
1) Outdoor Antenna (goes outside the building)
2) Signal repeater
3) Indoor Antenna (goes inside the building)!
4) Coaxial Communication Cables
5) Connetor
Where to use
For more information, please contact us directly!