GSM Signal booster for 900MHz Mini-type gsm signal amplifier
Negotiable /Piece
Min.Order:10 Pieces
Skyline (Shenzhen) Technology Co., Ltd.
GSM Signal booster for 900MHz Mini-type gsm signal amplifier use for cell phone signal booster
outdoor booster, umts gsm repeater for 900MHz cellular gsm repeater
outdoor booster, umts gsm repeater for 900MHz cellular gsm 900 repeater
GSM signal Booster for repeat the mobile phone signal,Signal Amplifier,2500Sqm(ST-GSM990)
GSM990 signal Booster for repeat the mobile phone signal,Signal Amplifier,2500Sqm(ST-GSM990)
GSM 900MHz mobile gsm signal booster Mobile Repeater gsm signal amplifier
Mobile signal booster/repeater/amplifier ST-900 introduction:
Cell phone signal amplifier(also named repeater or booster ) is a products designed to solve the mobile phone blind or weak signal. Inside of some tall buildings , the basement of some places such as malls, restaurants, places of entertainment such as karaoke OK sauna and massage,subway stations and many other places where cell phone signals can not reach and can not use the phone. Cell phone signal amplifier can solve these problems.In a particular place as long as installing a mobile phone signal Repeater , the mobile signal can be well boosted and the mobile phone can be well used,
Mobile signal booster/repeater/amplifier ST-900 specification
Working system | GSM |
Frequency range | Up link:890~915MHz Downlink: 935~960MHz |
Gain | Up link:10dB Downlink: 10 dB |
Export power | Up link:50 dBm Downlink: :50 dBm |
Pass band ripple | ≤1.8D B |
I/O impedence | 50Ω/N connector |
Noise figure | ≤6dB |
Transmission delay | ≤0.5μs |
Ambient temperature | -15°C~55°C |
Power supply | AC/220V±10% 45~55Hz DC,12V |
Size | 134mm×95mm×28mm |
Reliability | To the GB6993-86 standard |
Electromagnetic compatibility | To the ETS300 694-4 standard |
Function | a) Power supply LED denote b) Export power ELD denote |
Coverage area | 100sqm |
mobile signal booster/repeater/amplfiier ST-900 application
Small regions signal blind or weak signal area, such as underground or semi-underground place of business ,basements ,underground parking ,etc.
Traffic and large social influence areas ,such as bars ,cafes ,dance halls ,cafes ,fitness clubs ,leisure and entertainment,etc.
Elevator ,lift wells in particular ,not in the lift cables laid
Home ,office ,luxury yachts ,private cars ,public security system and road safety management ,etc.
mobile signal booster/ Repeater/amplifier ST-900 System Installation
Your system should come with at least the following items:
1) Outdoor Antenna (goes outside the building)
2) Signal repeater
3) Indoor Antenna (goes inside the building)
4) Coaxial Communication Cables
5) Connetor
Step 1 Start by taking your phone up to the roof or other location outside to find where the signal is strongest.
Step 2 Temporarily mount the Outdoor (outside) antenna in that location. You may need to adjust and move the antenna later. More notes on Donor antennas here.
Step 3 Run coaxial cable into the building to a convenient loaction (attic, etc.) where you can also get standard power for the Signal Repeater.
Step 4 Place the Signal Repeater in that location and connect the coaxial cable to the Outdoor Side of the Signal Repeater and the Outdoor antenna.
Step 5 Mount your Indoor (inside) antenna in a productive location. You may need to adjust or move the antenna later. More notes on Indoor antennas and patterns here.
Step 6 Connect coaxial cable between the Indoor antenna and the Signal Repeater output port.
Step 7 Power up the system and check for signal inside the building. If needed, tune system by moving and or pointing the Outdoor and Indoor antennas until they get the most signal possible.
Step 8 Secure all antennas and cables, securely mount the Signal repeater and clean up the installation.
Of course there are still a few more things to consider but in general, this is the basic procedure.
mobile phone signal booster repeater amplifer GSM ST-900 Packing including;
one piece booster
one piece outdoor antenna
one piece indoor antenna
60meter cable
all connector