Main Products: Switching Power Supply ,Power Module ,Rectifier Module ,Power Meter ,Power Supply System
12V 200W Meanwell switching power supply NES-200-12
Negotiable /Piece
Min.Order:12 Pieces
Quick Details View All >
Besternasia Electronics Limited
Business Type: Trading Company
Shenzhen Guangdong ChinaMain Products: Switching Power Supply ,Power Module ,Rectifier Module ,Power Meter ,Power Supply SystemProduct Details
12V 200W Meanwell switching power supply NES-200-12
12V meanwell power Features:
12V meanwell power supply Safty Approval:
UL60950-1 Approved
NES-200-12 Specification:
| Model | NES-200-12 12V meanwell power supply | |
| OUTPUT | DC VOLTAGE | 12V |
| RATED CURRENT | 17A | |
| CURRENT RANGE | 0 - 17A | |
| RATED POWER | 204W | |
| RIPPLE & NOISE (max.) Note.2 | 150mVp-p | |
| VOLTAGE ADJ.RANGE | 10 - 13.5V | |
| VOLTAGE TOLERANCE Note.3 | ±1.00% | |
| LINE REGULATION Note.4 | ±0.50% | |
| LOAD REGULATION Note.5 | ±0.50% | |
| SETUP, RISE TIME | 1000ms,50ms/230VAC 1000ms,50ms/115VAC at full load | |
| HOLD UP TIME (Typ.) | 20ms/230VAC 16ms/115VAC at full load | |
| INPUT | VOLTAGE RANGE | 90-132VAC/180-264VAC selected by Swith 254-373VDC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| EFFICIENCY (Typ.) | 85% | |
| AC CURRENT (Typ.) | 4.5/115VAC 2.5A/230VAC | |
| INRUSH CURRENT (Typ.) | COLD START 40A/115VAC 55A/230VAC | |
| LEAKAGE CURRENT | <3.5mA /240VAC | |
| PROTECTION | OVERLOAD | 105-150% rated output power |
| Protection type : Constant current limiting, recovers automatically after fault condition is removed | ||
| OVER VOLTAGE | 13.8-16.2V | |
| Protection type :Shut down O/P voltage, re-power on to recover | ||
| ENVIRONMENT | WORKING TEMP. | -20-+50 °C ( Refer to :Derating Curve") |
| WORKING HUMIDITY | 20-90% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40-+85 °C , 10-95% RH | |
| TEMP. COEFFICIENT | 0.03%/ °C (0 ~ 50 °C ) | |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |
| SAFETY & EMC | SAFETY STANDARDS Note.6 | UL60950-1,CB(IEC60950-1),GB4943.1:2011 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH | |
| EMC EMISSION | Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3 | |
| EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-1, light industry level, Criteria A | |
| OTHERS | MTBF | 271.9K hrs min. MIL-HDBK-217F(25C) |
| DIMENSION | 215*115*50mm (L*W*H) | |
| PACKING | 0.93kg;12pcs/12kg/0.92CUFT | |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature. | |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||
| 4. Please connect positive pole of input voltage with mark “N” of terminal block, connect negative pole of input voltage with mark “L” of terminal block, using DC voltage for input voltage. | ||
| 5. Load regulation is meansured from 0% TO 100% rated load. | ||
| 6. For the request of GB4943.1, the power supply is only suitable for use in the altitude 2000m below and the non tropical climate condition. | ||
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests.please refer to "EMI testing of component power suppliers". 8.Length of set up time is measured at cold first start.Turning ON/OFF the power supply very quickly may lead to increase of the set up time | ||
Ordering Code:
12V 200W Meanwell switching power supply NES-200-12
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln