Specifications

NES-100-48 48V meanwell power supply for led flood light
1. 100% full load burn-in test
2. Short circuit/Over load/voltage pr

NES-100-48 48V meanwell power supply for led flood light

meanwell power supply led flood light Features:

48V meanwell power supply Safty Approval:  

 

UL60950-1, ccc, CB Approved

NES-100-48 Specification:

Model		NES-100-48
OUTPUT	DC VOLTAGE	48V
	RATED CURRENT	2.3A
	CURRENT RANGE	0-2.3A
	RATED POWER	110.4W
	RIPPLE & NOISE (max.) Note.2	150mVp-p
	VOLTAGE ADJ.RANGE	45.6-52.8V
	VOLTAGE TOLERANCE          Note.3	1.00%
	LINE REGULATION                 Note.4	0.50%
	LOAD REGULATION                Note.5	0.50%
	SETUP, RISE TIME	500ms,20ms/230VAC     500ms,20ms/115VAC at full load
	HOLD UP TIME (Typ.)	30ms/230VAC      25ms/115VAC at full load
INPUT	VOLTAGE RANGE	85-132VAC/176-264VAC selected by Swith      248-373VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	86%
	AC CURRENT (Typ.)	2A/115VAC  1.2A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 36A
	LEAKAGE CURRENT	<2mA /240VAC
PROTECTION	OVERLOAD	110-150% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	55.2-64.8V
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT	WORKING TEMP.	-20-+60C( Refer to :Derating Curve")
	WORKING HUMIDITY	20-90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40-+85C, 10-95% RH
	TEMP. COEFFICIENT	0.03%/ (0 ~ 50C )
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS        Note.6	UL60950-1,CB(IEC60950-1),CCC GB4943.1:2011 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH
	EMC EMISSION	Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-1, light industry level, criteria A
OTHERS	MTBF	320.7K hrs min.  MIL-HDBK-217F(25C)
	DIMENSION	159*97*38mm (L*W*H)
	PACKING	0.52kg;30pcs/17.5kg/0.97CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.
	4. Line regulation is measured from low line to high line at rated load.
	5. Load regulation is meansured from 0% TO 100% rated load.
	6. For the request of GB4943.1, the power supply is only suitable for use in the altitude 2000m below and the non tropical climate condition.
	7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests.please refer to "EMI testing of component power suppliers".

Ordering Code:

NES-100-48 48V meanwell power supply for led flood light