Specifications

Wireless Fireworks Device,In order to make the products more durable, please connect the products in series.

Wireless Fireworks Device

 

Using methord;

1.Please put the batteries in the receiver, then turn on the power switch and after 2-3 seconds the lamp lighting.

2.Please press the remote.It indicates the remote is in good condition if the power lamb off. 3.Please connect products in red&black plug .It indicates the line is ok if the power lamb off.

4.Please press the remote button to fire the products.

How to make the receivers programable

Receivers are programmable - program any receiver of any system to any button of any System remote transmitter.  Program all receivers to fire on one remote button, or two receivers on one button or three, etc.  Totally flexible setup arrays.

Methord: (pls make sure the products are not connected.) For example, make button “B” to control two receivers together.

Please find a small hole on the back of the receiver, then put a stick in the hole by one hand. Another hand keep pressing button “B”. In this case, the power lamb will flashing.After flashed for more than 3 times.First release the hand with stick , then the hand with remote.Now if you press “B” and both power lambs off .It means two receivers could controlled by this button. Using the same methord, and you could run more receivers by a button..

Advantages: 

1.Power source: 4.5v - requires only3 AA batteries per receiver

2.Range: 80-100m/ 200-250m. Each receiver with the antenna.

3.Firing capacity: 1-2pcs consumer or display igniters.

4.Fully programmable - make any or all receivers to any button on any System’s remote.

5.Expandable - Add other receivers (available individually) to expand number of cues.

6.Economical - Offer at an affordable price.

Specifications:

1.Frequency: 315MHz

2.Receivers : 4

3.RF Transmitter :1

4.Transmitter power source - 12v 23A battery.

Attentions:

1.Please do not shake incept box violently, when no need use it .

2.Notice to prevent defile incept box when it’s close to fireworks.

3.Please take the cell out when no use products, for prevent defile incept box.

4.Please don’t place the product in the damp , sour ,alkali and pollution environment.