Product Details

2015 Newest Design Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant

Brief Introduction For Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant

This used/old/waste tyre/plastic/rubber recycle to fuel oil pyrolysis plant is applied to process the tyre/plastic/rubber scraps into liquid fuel oil, which achieves the high efficiency continuous production with great safety, zero environment performance, good society effect result and economic benefit.

Working Flow of The 2015 Newest Design Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant

Firstly, two or three workers put the raw material into the reactor, seal the feed inlet, and then burn the coal /wood in the bottom of the furnace. The waste raw material in the reactor will be heated slowly. The oil steam will be produced when the temperature reach 180°C-400°C. And then the oil steam will be separate to light component and heavy component by separate device. The light component will enter into the condenser and meanwhile the residues will be discharged automatically in succession. After cooling, the liquefied part will be crude oil, and the waste gas (this part cannot be liquefied) will return to heating supply system to be burned by combustion gas purification.

3D 2015 Newest Design Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant

Products From The 2015 Newest Design Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant

(Material: Waste Tyre)

NO.	Name	Percentage	Usage
1	Tyre oil	45%	* can be sold directly. * make diesel and gasoline by using oil distillation machine. * can be as fuel.
2	Carbon black	30%	* can be sold directly. * make fine carbon by using carbon black refining machine. * make pellet by using carbon pelleting machine.
3	Steel wire	15%	* can be sold directly. * make steel bloom by using hydraulic press-packing
4	Oil gas	10%	* can be as fuel burn by using gas burn system (pyrolysis machine included) * extra gas also can be storage as fuel for other heating.

Oil Yield Rate From 2015 Newest Design Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant
(Material: Waste Plastic)

Name	Oil Yield Percentage
PE	95%
PP	90%
PS	90%
ABS	40%
Plastic Cable	80%
Plastic Bag	50%
Leftovers of Paper	Wet 15-20%, Dry 60%
House Garbage	30-50%
Submarine Cable	75%
PVC	Not Suitable
PET	Not Suitable

Customer Concerns

The Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant machine’s installation:

We will give the foundation drawings to buyer after making the order. We will send engineer when buyer gets the machine. The engineer mainly installs the machine and trains your workers.

The Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant machine’s covering area:

The machine itself covers 300-400 square meters (length 20-30M; Width 15M)

Adding raw material stay, carbon black stay, big oil tank zone, workers rest room and simple office, at least 600-800 square meters.

Used/Old/Waste Tyre/Plastic/Rubber Recycle To Fuel Oil Pyrolysis Plant Catalyst formula:

We will supply the catalyst formula after you order the machine; you can buy them at your local.