Product Details

High oil yield waste tire pyrolysis plant for crude oil

A: Introduction to waste tire pyrolysis plant

This plant is a processing unit that makes use of pyrolysis of massive waste tyre to get liquid oil. This process unit is made up of heating system, horizontal type rotating reactor, reduced pressure oil and gas dust removal system, cooling system, surplus gas treatment system, high temperature sealing feeding and deslagging system, electric control system of intelligent digital display and so on.

B: The advantages of waste tire pyrolysis plant

1. Coarse distillation system

The unit of coarse distillation tower in the vacuum drum, its internal structure, which can effectively improve the quality of products, not only the density is small, but the liquidity of crude oil is great, oil color is lighter.

2.High temperature sealing feeding and heat sealing slag system

The advantage of the system is that the system can complete sealing feeding and slagging under the condition of high temperature, can not only improve the production efficiency, but greatly reduce the energy consumption.

3.Electric control system of intelligent digital display

This system is intelligent digital display can show temperature and pressure of all parts, with intelligent alarm function, can reduce unnecessary waste of resources caused by artificial reason.

4. Desulfurization and dust removal system

The system can not only be white when giving out the flue gas, can greatly reduce the concentration of sulfur dioxide in flue gas due to using water containing soda when spraying.

Gas emission report as follows

C: The main device of waste tire pyrolysis plant

The Main Parts And Specification Of waste tire Pyrolysis Plant
No	Name	Quantity (set)	Specification	Remarks
1	Reactor	1	Φ22007500δ16mm	28.5m3, Q245R Q345R
2	Vacuum dust removal tank	1	Φ8001900δ5.0mm	0.85m3, Q245R Q345R
3	Fractionating tower	1	Φ5302500δ5.0mm	0.55m3, Q245R Q345R
4	Coil condensers	4	Φ5303000δ3.5mm	2 Pieces; heat exchange area 12m2*2
4	Coil condensers	4	Φ6302000δ3.5mm	2 pieces; heat exchange area 18m2*2
5	Oil storage tank	2	Φ12005000δ3.5mm	5.5m3, Q245 Q345R
6	Water seal	1	Φ9001900δ3.5mm	0.95m3, Q245R Q345R
7	Slag remover	1	Φ3252500δ10.0 mm	4kw, input quantity: 8m3/h
8	Raw material storage bin	2	120012001000*δ2.5 mm	1.5m3; 2.2kw
9	Slag storage tank	1	Φ12002100δ2.5 mm	1.9m3
10	Screw feeder	1	Φ3254500δ3.5mm	3.0 kw, feeding capacity: 3m3/h
11	Conveyor	1	50005005500mm	2.2kw
12	Electric knife type valve	3	Model: DN250*1.0Mpa	Material: cast steel
13	Desulfurization deduster	1	Φ53002500δ3.5 mm	Q245R Q345R
14	Desulfurization precipitator alkali storage tank	1	20001200800*δ3.5 mm	Q245R Q345R
15	Electric control cabinet	1		3 terms;Intelligent digital alarm display, manual response

D: The fuel to reactor

NO.	Fuel	Note
1	Coal	/
2	Firewood	/
3	Oil(fuel oil, tyre oil, heavy oil etc..)	Use oil burner
4	Natural gas	Use gas burner
5	electricity	Electric stove wire
6	Carbon black pellet	We can supply carbon make pellet machine

E: End product percentage

Raw Materials	Furnace Oil Rate	Carbon black	Steel	Waste Gas
Big truck tyres	45%--50%	25%-30%	10%	10%-15%
Car tyres	40%-45%	30%-35%	10%	10%-15%
Bicycles and motorcycles tyres	30%--35%	35%-40%		15%-25%
Fishing net,Safety net, farm-oriented film	45%--50%	30%-40%		15%-25%
Convenient bags , weave bags	40%	40%		20%
Off –cut of recycled paper mill	20%--30%	45%-55%		25%

F: Tyre oil parameter:

Item	Unit	Tyre fuel oil
Density	g/cm3	0.9072
Freezing point	℃	-6
Flash point	℃	47
Kinematic viscosity	M Ps	3.29
Combustion value	KJ/kg	10500

G: The machine installation(charge and time)

We will give the foundation drawings to buyer after make the order .we will send engineer when buyer get the machine. The engineer mainly install the machine and training your workers.

Charges: Buyer book ticket , supply food and accommodation to engineer and pay our engineer USD 100 per day.

Installation time: It depends workers working efficiency, normally about 25-30 days.

H: Warranty:

We warranty the complete machine 1 year. The maintance is all life.

We use the Q245 / Q345 national standard boiler plate .The boiler steel plate,can bear highest temperature 700℃ when pyrolysis.

If machine has some problems under the right operation (not inculding the wearing parts) , we send engineer to buyer site to provide maintance, it is free within 1 year.