J:CDH-1575-YQ Full Automatic Toilet Paper Machine Production line

Part 1:

Function& feature:

1.It can do for the toilet paper & kitchen towel. The punching size can be adjustable.

2.Two sets of steel to rubber embossing units

3.Automatic core loading and replacing.the logs are autoamtically pushed out after finishing winding, and then start winding again. The cores can be adjusted to any size of cores within one minute.  

4.Automatic trimming,gluing and sealing:it has replaced the traditional sealing of rolls with the international popular rtimming and sealing,which can have 10-18mm tails to facilitate to start pulling out the paper. At the same time, it can greatly cut down the wastage of the paper,thus to cut down the production cost.

5.Advanced PLC programmable control Technology: The winding profiles can be tight at the beginning of winding, and then getting loose,to avoid the problems that the cores are loose from the rolls after long time storage.

6.With high precision screwy perforation knife.with 4 performation blades to make clear perforating. The perforating pitch controlled by gear box

7.Two backstands,pneumatic jumbo roll loading,and pneumatically wide belt paper unwinding driving, and individual web tension control unit for each jumb roll.

Main Technical Parameter:

Part 2:

Low saw is one of the important equipment for the automatically continuous production line of toilet rolls and kitchen towels,greatly increasing the production automation and efficiency.the machine is characteristic of a strong,well built structure and perfect cutting action.the machine is equipped with the following:

Ⅰ. Main feature:

1. Automatic blade sharpening unit complete with lubrication system
2. Automatic approach of grinding wheels to cutting blade based on the blade wear
3. Log accompaniment system
4. Automatic trim eliminating device
5. Tow clamping systems for toilet rolls and kitchen towel. Short chage over time.

II. Technical parameter:

1. Log Length:1750mm
2. Log outside diameter:105-115mm   
3. Cutting length:Customize(above 6mm)
4. Diameter of round blade:610mm
5. Speed:70-80 cut/min
6. Install power:11KW
7. Machine dimension:5730X1720X1920
8. weight: about 3.5Ton

Part 3 Packing machine:

It will automatically group the rolls and transfer them into the bags,on configuration of 6,8,10,12,16 and 20 rolls per bag, on one layer or two layers,core or standing up type,with one automatic sealing machine to seal the packages coming out from the bagger.This bagger can be run only by one person.