Specifications

(1)Full Automatic
(2)For the toilet paper or kitchen towel
(3)length is adjustable
(4)production line
(5)can do bag package

CDH-1575 YQ Full Automatic Toilet Paper Production line

 

 

According to the machine,It can be devided into three parts:

 

Part 1(slitting and rewinding):toilet paper machine

 

Function and feature:toilet paper machine

 

1.It can do for the toilet paper and kitchen towel. The punching size can be adjustable. toilet paper manufacturing machine

 

2. Two sets of steel to rubber embossing units. toilet paper manufacturing machine

 

3. Automatic core loading and replacing.the logs are autoamtically pushed out after finishing winding, and then start winding again. The cores can be adjusted to any size of cores within one minute.  toilet paper manufacturing machine  

 

4. Automatic trimming, gluing and sealing: it has replaced the traditional sealing of rolls with the international popular rtimming and sealing,which can have 10-18mm tails to facilitate to start pulling out the paper. At the same time, it can greatly cut down the wastage of the paper,thus to cut down the production cost.

 

5. Advanced PLC programmable control Technology: The winding profiles can be tight at the beginning of winding, and then getting loose,to avoid the problems that the cores are loose from the rolls after long time storage.

 

6.With high precision screwy perforation knife.with 4 performation blades to make clear perforating. The perforating pitch controlled by gear box.

 

7.Two backstands,pneumatic jumbo roll loading,and pneumatically wide belt paper unwinding driving, and individual web tension control unit for each jumb roll .

 

Main Technical Parameter: toilet paper manufacturing machine

 

width of Jumbo Roll	1500-2700mm
Diameter of Jumbo roll	Max 1500mm
Inner diameter paper core of Jumbo roll	76.2mm
Diameter rewinding product	60-150mm
Inner diameter paper core of rewinding product	32-50mm
Punching size	10-15mm
Working speed	120-160m/min
Setting Parameter	Interaction
Pneumatic	3HP ,Above 5kg/cm2 Pa
Install power	7.5-15KW
Back paper stand	2 or 3 pieces

 

 

Part 2(cutting): toilet paper manufacturing machine

 

Low saw is one of the important equipment for the automatically continuous production line of toilet rolls and kitchen towels,greatly increasing the production automation and efficiency.the machine is characteristic of a strong,well built structure and perfect cutting action.the machine is equipped with the following:

 

Main feature: toilet paper manufacturing machine

1.Automatic blade sharpening unit complete with lubrication system

2.Automatic approach of grinding wheels to cutting blade based on the blade wear

3.Log accompaniment system. toilet paper manufacturing machine

4.Automatic trim eliminating device. toilet paper manufacturing machine

5.Tow clamping systems for toilet rolls and kitchen towel. Short change over time

 

Technical parameter: toilet paper manufacturing machine

 

Log Length	1750mm
Log outside diameter	105-115mm
Cutting length	Customize(above 6mm)
Diameter of round blade	610mm
Speed	70-80 cut/min
Install power	11KW
Machine dimension	5730X1720X1920
weight	about 3.5Ton

 

Part 3 (Packing) : toilet paper manufacturing machine

 

It will automatically group the rolls and transfer them into the bags,on configuration of 6,8,10,12,16 and 20 rolls per bag, on one layer ,core or standing up type,with one automatic sealing machine to seal the packages coming out from the bagger.This bagger can be run only by one person.

 

 

Working flow: toilet paper manufacturing machine

 

Raw paper →press the paper → punching → planish the paper → rewinding → transfer to log saw → cutting → transfer to packing machine → put the rolls into bags → horizontal sealing → output product toilet paper manufacturing machine

 

 

Finished product: toilet paper manufacturing machine

 

 

 Our factory: toilet paper manufacturing machine