Name: 25W Dual Output Open Frame Power Supply PD-25 Series
Brand: GRAIGAR
Availability: InStock

Product Details

Specifications

Universal AC input / Full range
Low leakage current<0.5mA
Protections: Short circuit/Over load/Over voltage/Over temperature

25W Dual Output Open Frame Power Supply PD-25 Series

MODEL NO.: PD-25

Features:

Universal AC input / Full range
Low leakage current<0.5mA
Protections: Short circuit/Over load/Over voltage/Over temperature
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 100KHz
Low cost
High reliability

SPECIFICATION:

MODEL		PD-25A		PD-25B		PD-2505		PS-2512		PS-2515
OUTPUT	OUTPUT NUMBER	CH1	CH2	CH1	CH2	CH1	CH2	CH1	CH2	CH1	CH2
	DC VOLTAGE	5V	12V	5V	24V	5V	-5V	12V	-12V	15V	-15V
	RATED CURRENT	2.1A	1.2A	1.2A	0.8A	2.5A	2.5A	1A	1A	0.8A	0.8A
	CURRENT RANGE	0.2 ~ 2.5A	0.1 ~ 1.5A	0.2 ~ 2A	0.1 ~ 1A	0.1 ~ 3A	0.1 ~ 2.5A	0.1 ~ 1.2A	0.1 ~ 1.2A	0.1 ~ 1A	0.1 ~ 1A
	RATED POWER	25W		25.2W		25W		24W		24W
	RIPPLE & NOISE (max.) Note.2	50mVp-p	150mVp-p	50mVp-p	200mVp-p	50mVp-p	50mVp-p	50mVp-p	50mVp-p	50mVp-p	50mVp-p
	VOLTAGE TOLERANCE Note.3	±2.0%	±6.0%	±2.0%	±6.0%	±6.0%	±6.0%	±4.0%	±4.0%	±4.0%	±4.0%
	LINE REGULATION	±0.5%	±2.0%	±0.5%	±2.0%	±1.0%	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±4.0%	±1.0%	±4.0%	±4.0%	±4.0%	±3.0%	±3.0%	±3.0%	±3.0%
	SETUP, RISE, HOLD TIME	250ms, 50ms,100ms/230VAC 250ms, 30ms,16ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC 127 ~ 370VDC
	FREQUENCY RANGE	47 ~63Hz
	EFFICIENCY (Typ.)	71%		77%		73%		74%		75%
	AC CURRENT	0.65A/115VAC 0.4A/230VAC
	INRUSH CURRENT (max.)	COLD START 32A
	LEAKAGE CURRENT	<0.5mA/240VAC
PROTECTION	OVERLOAD	Above 105% rated output power
		Protection type: Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	5.75 ~ 6.75V	13.8 ~ 16.2V	5.75 ~ 6.75V	27.6 ~ 32.4V	5.75 ~ 6.75V	-5.75~-6.75V	13.8 ~ 16.2V	-13.8~-16.2V	17.3~ 20.3V	-17.3~-20.3V
		Protection type: Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	Tj 135ºC typically (U1)Detect on main control IC
		Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-10 ~ +60ºC (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC(Note.4)	SAFETY STANDARDS	Design refer to UL60950-1,TUV EN60950-1
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5; Light industry level, criteria A
OTHERS	MTBF	507.9Khrs min. MIL-HDBK-217F(25ºC)
	DIMENSION	1076128mm (LWH)
	PACKING	0.15Kg;96pcs/15.9Kg/1.3CUFT
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
	2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3.Tolerance: includes set up tolerance, line regulation and load regulation.
	4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

EDITED BY JENA