Specifications

Universal AC input / Full range
Protections: Short circuit/Over load
Cooling by free air convection

75W Single Output Switching Power Supply S-75 Series

Features: 

• Universal AC input/Full range
• Protections: Short circuit/Over load
• Cooling by free air convection
• LED indicator for power on
• Fixed switching frequency at 27KHz

SPECIFICATION:

MODEL		S-75-5	S-75-12	S-75-15	S-75-24
OUTPUT	DC VOLTAGE	5V	12V	15V	24V
	RATED CURRENT	15A	6.3A	5A	3.1A
	CURRENT RANGE	0 ~ 15A	0 ~ 6.3A	0 ~ 5A	0 ~ 3.1A
	RATED POWER	75W	75.6W	75W	74.4W
	RIPPLE & NOISE (max.) Note.2	120mVp-p	120mVp-p	150mVp-p	150mVp-p
	VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V
	VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	300ms, 50ms, /230VAC      800ms, 50ms/115VAC at full load
	HOLD TIME(TYP.)	90ms/230VAC      12ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC     120 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	73%	76%	77%	79%
	AC CURRENT	2A/115VAC       1A/230VAC
	INRUSH CURRENT (max.)	COLD START 20A/115VAC 40A/230VAC
	LEAKAGE CURRENT	<3.5mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power
		Protection type: Hiccup mode, recovers automatically after fault condition is removed.
	OVER VOLTAGE	5.75 ~ 6.75V	13.8 ~ 16.2V	17.25 ~ 20.25V	27.6 ~ 32.4V
		Protection type: Hiccup mode, recovers automatically after fault condition is removed.
ENVIRONMENT	WORKING TEMP.	-10 ~ +60ºC (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note.4)	SAFETY STANDARDS	Design refer to UL1012, UL1950, TUV EN60950
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5;6,8,11; ENV50204, EN55024, Light industry level, criteria A
OTHERS	MTBF	316.2K hrs min. MIL-HDBK-217F (25ºC)
	DIMENSION	159*97*38mm (L*W*H)
	PACKING	0.463Kg; 30pcs/15.56Kg/0.0250CMB
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

EDITED BY JENA