•   DMM and loop calibrator in one tool
•   Clear LCD with backlight; 4,000 counts (30,000 counts for dc current)
•   Ni – MH  rechargeable  batteries
•    1000V overload protection on V, ohms, frequency.
•    25% Manual Step plus Auto Step and Auto Ramp on mA output.
HuaYi combined the DMM you trust with the loop calibrator you need. The MS7287 ProcessMeter  puts a complete troubleshooting solution in the palm of your hand. Get in touch with more information, faster and easier with the newest member of the HuaYi 80 Series, the MS7287 ProcessMeter. The MS7287 gives you the measurement capabilities you expect from our rugged, reliable DMMs plus the ability to source, simulate, or measure dc current with 1 microamp resolution and accuracy of 0.05%. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you're tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power.

 

•   Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency
•   0.1% dc voltage accuracy
•   0.05% dc current accuracy, 1 ‘A resolution to 30 mA
•   Simultaneous mA and % of scale readout
•   True rms ac voltage measurement to 1 kHz
•   Frequency measurement to 20 kHz
•   Min/Max/Average/TouchHold/Relative modes
•   Diode test and continuity beeper

DC current source/loop calibrator

•   20 mA current source/simulator
•   Simultaneous mA and % of scale readout
•   Manual step (25%, coarse, fine) plus auto step and auto ramp