Specifications

BTH05 USB Three Channel Temp Humidity Data Logger Temperature Recorder with Display Temp Probe Outside

 

 

BTH05 USB Three Channel Temp Humidity Data Logger Temperature Recorder with Display Temp Probe Outside

 

This data logger measures and stores temperature(one channel for internal, and another channel for external probe) and humidity readings. Some professional applications can be provided by the PC software DGraph. Logger status, alarm indication and low battery indication are via flashing red/green LED and yellow LED. The button on housing can be used to start logging, or confirm and clear LED alarm when LED alarm is hold status.

 

User can plug data logger straight into PC’s USB port without any cables. Before getting started, user need to install USB driver and DGraph software, provided on the CD which is included in product packing box. All the software can run under Windows XP, Vista, 7 or 8(32 bit and 64 bit Versions). User can easily use DGraph software to setup sample rate(from 10 seconds to 12 hours), high/low alarm limit and start/stop method , and download data to PC, etc. And then user can view, analyse and print the data, or export other file formats(txt, xsl, csv, bmp, jpg).

 

Especially, for some professional applications, user can set access password, name each channel, enable/disable specified channel, input calibration data for each channel, disable LED indication for saving power, and select sample mode(Instant, Average, Maximum and Minimum), etc.

APPLICATIONS

 

This data logger is used mainly to monitor and verify humidity&temperature-sensitive goods, equipment or areas. Example:
Cold Chain    Refrigeration   Transportations   HVAC   Food&Pharmaceutical  Warehouse

 

FEATURES

 

With an external temperature probe, the length of 2m(or customized)

 

Portable, precise, compact and low cost

 

USB interface directly communicate with PC for setup and data download

 

Unique and uniform PC control software: DGraph

 

Each unit has single serial number

 

User can set access password fo each data logger

 

Alarm and status indication via LED

 

Start logging method: Immediately, Button, Start at

 

Replaceable lithium battery and data is not lost if exhausted

 

Two point calibration for each channel

 

Start logging method: Immediately, Button, Start at

 

Replaceable lithium battery and data is not lost if exhausted
Alarm and status indication via LED

 

Alarm limit settings for all channels

 

User can customize compound graph

 

User can customize new unit easily

 

User can name each channel and enable/disable it

SPECIFICATIONS

 

Measurement Range: -35 to 80°C(-31 to 176F)(Internal); 0 to 100%RH; -40°C~125°C(External)

 

Accuracy(Typ.): ±0.3°C(±0. 5F); ±3%; ±0.5°C(±0. 9F)

 

Resolution(Typ.): 0.1°C(0.2F); 0.1%; 0.1°C(0.2F);

 

Memory Capacity: 64KBytes(Total 32,000 readings)

 

Sample Rate: User selectable from once every 10 seconds to once every 12 hours

 

PC Software: DGraph software and USB driver required (Included in CD)